En-6
6.1. Weekly timer
■
Setting details
1.
2. Press
to select the program number and the
day of the week.
Selected program number (1~4) and the day of the week will blink.
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
3. Press
.
4. Press
to choose the timer operation.
5. Press
.
return to step 1.
6. Press
7. Press
.
to step 1.
8. Press
to set the temperature.
Temperature setting range
Auto, Cooling,
or Dry mode:
18.0-30.0 °C
*Even if you set to 10, 16.0-17.5 °C, the air
conditioner will run at 18.0 °C.
Heating mode: 10 or 16.0-30.0 °C
9. Press
.
The setting display will return to step 1.
10. Press
to complete the setting.
Be close to the indoor unit.
NOTES: [
] indicator on the indoor unit will not turn on even if the
setting is complete.
• If you want to return the previous step, press .
• To check the schedule, use
to browse the Weekly
timer settings in step 1.
.
• To deactivate the Weekly timer, press
while is
shown on the remote controller display.
The indicator will disappear.
NOTES:
• The operation modes will be the same as the mode at the last time
type of operations cannot be set automatically.
•
will work.
• If two On timers are set on the same time, the air conditioner will run
in the order of the program number.
• You cannot the Weekly timer and the other timers simultaneously.
while the Weekly timer is activated, the Weekly timer will be
deactivated.
In such a case, activate the Weekly timer after the other timer
• If the wired remote controller (optional) is connected, this function is
restricted.
Day of the week
Program number
(Without a timer)
(On timer)
6. TIMER OPERATIONS
NOTES: When [
] indicator on the indoor unit blinks, set the clock
and timer again. This blinking shows that the internal clock go
wrong due to an interruption of the power supply. (Refer to
page 10.)
■
Timer setting procedure
1. Press
.
on the remote controller display will blink.
2. Press
to choose timer operation.
The timer operation will change as follows:
Weekly timer
Enables you to set operation
schedules up to 4 setting for each
day of the week.
On timer
Starts the operation at your desired
time.
Stops the operation at your desired
time.
Program timer
Operates as the combination of the
Sleep timer
Supports your comfortable sleep
by moderating the air conditioner
operation gradually.
3. Press
.
4. Set each timer operation.
For details, refer to the following instructions of each timer setting.
5. Press
to complete the timer setting.
Be close to the indoor unit.
• To cancel the timer setting during the procedure, press
again.
■
Air ow direction range
Vertical air ow direction
Change by
1
⇄
2
⇄
3
⇄
4
⇄
5
⇄
6
Swing operation by
Cooling, Dry 1 4
Heating 3 6
Fan * 1 4 or 3 6
the Swing operation.
NOTES:
•
•
a while from the start of the operation.
• In the Cooling or Dry mode, position 1-3 is recommended to prevent
condensation drips damaging your property. If position 4-6 keeps for
position 3 automatically.
• When using the mobile app (optional wireless LAN control is
Horizontal air ow direction
4
5
2
1
Change by
1
⇄
2
⇄
3
⇄
4
⇄
5
Swing operation
by
1 5
NOTES:
direction for a while from the start of the operation.
9387602142-02_OM.indb 6 01/12/2022 13:03:59
To Next Page
Loading...
Need help?
General
