What to do if my Fujitsu ASYA07LGC has an indoor fan lock error?
If your Fujitsu Air Conditioner is displaying an indoor fan lock error, check the fan motor connector for looseness or defective contact.
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.0 kW |
| Heating Capacity | 2.5 kW |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Outdoor Unit Weight | 23 kg |
| Noise Level (Outdoor) | 48 dB(A) |
Detailed electrical specifications including capacity, power, and current.
Details on how the unit controls cooling capacity based on room temperature.
Details on how the unit controls heating capacity based on room temperature.
Operation control for dehumidification mode, including compressor and fan behavior.
Compressor operating frequency ranges and start-up control.
Control logic for the electronic expansion valve based on operating conditions.
Conditions and procedures for defrost operation in heating mode.
Protection controls for discharge gas temperature, current, and freezing.
Special tools and equipment required for R410A refrigerant servicing.
Troubleshooting steps when the unit shows no signs of operation.
Using the self-diagnosis function for error detection and interpretation.
Diagnosing problems related to the refrigerant cycle and its components.
List and description of specialized tools required for R410A installation.
Procedure for refrigerant recovery using pump down or forced cooling.
To Next Page
