REPLACEMENT PARTS
09-19
Model : AOYR24LCC
PROCESS Assemble PWB SUB ASSY (FILTER) to CASE (INV)
SCREW, TAPPING
REGULATIONS
Pay attention so as not to fasten lead wire, when assembling PWB SUB ASSY (FILTER) to CASE (INV)
Like figure 1, connect lead wire of orange W28 and brown W29.
Insert STOPPER shown circle of figure A into inside of CASE (INV)
Insert into inside of CASE(INV)
figure A
From downside of CASE (INVERTER)
lead wire must not touch parts.
Pay attention so as not to fasten lead wire
Stopper
NG
1
To Next Page
Loading...
