Fujitsu AUXG07-22KVLA - Page 303

3. Select the [Function No.] with pressing the [Cursor button (Left/Right)], and select the Function
No. to be set with pressing the [Cursor button (Up/Down)].
C
ancel
:
OK :
Function s e ttin g
Mo 10:00AM
R.C. Function Setting
address No. No.
Version Err or h i stor y
00 30 00
4. Select the [Setting No.] with pressing the [Cursor button (Left/Right)], and select the Setting No.
to be set with pressing the [Cursor button (Up/Down)].
C ancel : OK :
Function s e ttin g
Mo 10:00AM
R.C. Function Setting
address No. No.
Version Err or h i stor y
00 30 01
5. Pressing the [Enter button], confirm the setting.
The data will be transferred to the indoor unit.
C ancel : OK :
Function se tting
Mo 10:00AM
R.C. Function Setting
address No. No.
Version Err o r hi s tory
00 30 01
C ancel : OK :
Function se tting
Mo
10:00AM
R.C. Function Setting
address No. No.
Version Err o r hi s tory
00 30 - -
C ancel : OK :
Function se tting
Mo
10:00AM
R.C. Function Setting
address No. No.
Version Err o r hi s tory
00 30 01
Error
Good
Function details: Refer to Chapter 14-5. "Function details" on page 307.
- 295 -
14-3. Indoor unit (setting by wired remote controller) 14. Function settings
4-5 UNIT MULTI-SPLIT TYPE 4-5 UNIT MULTI-SPLIT TYPE