En-5
: See page
► 10
► 6 • 7 • 12
► 10
►
► 12
► 11
► 12
► 7
► 7
► 7
► 9
► 9
► 6
► 6
► 6 • 13~19
► 7
► 12
MIN. HEAT button
POWERFUL button
TEMP. button
Signal Transmitter
START/STOP button
MODE button
FAN button
SWING button
ECONOMY button
OUTDOOR UNIT
LOW NOISE button
SET button
CLOCK ADJUST button
RESET button
TIMER
SETTING
button
SEND
button
SELECT
button
NEXT
button
BACK
button
WEEKLY
button
ON/OFF
button
SLEEP
button
► 13~19
MODE indicator
LOW NOISE MODE indicator
SENSOR button
ENERGY SAVING
PROGRAM indicator
REMOTE CONTROLLER DISPLAY
► 5 • 13~19
► 7
► 9
► 7
TEMPERATURE indicator
SEND indicator
CLOCK & TIMER indicator
Signal transmission indicator
SWING indicator
FAN speed indicator
To facilitate explanation, the accompanying illustration has been drawn to show all possible indicators; in actual opera-
tion, however, the display will only show those indicators appropriate to the current operation.
After the button is pressed on remote
controller, only the operated part is
displayed until the transmission of the
signal is completed. It is a convenient
function to confi rm the content of the
operation easily.
Ex.) When you change the preset
temperature from 74˚F to 78˚F during
the cooling operation.
Before the button
is pressed
When the button
is pressed
Transmission
completed
■
About the button operation and display of remote controller
Signal transmission indicator
REMOTE CONTROLLER
► 11
■
To change the temperature unit:
1. Press the TEMP. (Up) button (
) for at least 5 seconds to display the current temperature unit. (Factory setting: °F)
2. Press the TEMP. buttons (
/
) to switch the temperature unit. (°F
↔
°C)
3. With either of pressing the START/STOP button or no additional button operation for 30 seconds in step 2., the temperature
unit currently selected will be set.
9319356075_OM.indb 59319356075_OM.indb 5 8/7/2012 11:28:50 AM8/7/2012 11:28:50 AM
To Next Page
Loading...
Need help?
General
