To Next PageTo Next PageWhy doesn't my Fujitsu Air Conditioner operate immediately after turning it on?
Your Fujitsu Air Conditioner might not start immediately after being stopped and restarted because the compressor has a built-in 3-minute delay to prevent fuse blowouts. Also, the protection circuit may take about 3 minutes to allow the unit to operate after the electrical breaker is turned off and on again.
General| Brand | Fujitsu |
|---|---|
| Model | AIR CONDITIONER DUCT TYPE |
| Category | Air Conditioner |
| Language | English |
Procedures which, if improperly performed, are most likely to result in death or serious injury.
Procedures which, if improperly performed, might lead to death or serious injury.
Procedures which, if improperly performed, might possibly result in personal harm or damage.
Instructions for setting the current day and time on the remote controller.
Instructions for starting and stopping the air conditioner operation.
Guide to selecting the operation mode (AUTO, COOL, DRY, FAN, HEAT).
How to adjust the desired room temperature using the remote controller.
Procedure for selecting the fan speed (AUTO, HIGH, MED, LOW, QUIET).
Steps to configure the weekly timer settings.
How the weekly timer begins operation automatically.
Step-by-step guide to setting the temperature set back timer.
How the temperature set back timer operates and how to cancel it.
Immediate actions to take in case of malfunction like burning smell.
Interpreting the 'EE' display for system inspection.
