Operation
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by redu cing
the brightness of the picture.
The ECO mode can only be activated when the ACR and Auto Brightness are switched off.
► Press the
button to switch ECO operating mode on or off.
The message ECO Mode on o
r ECO Mode off is displayed.
If ECO mode is active, a brightness is used that is the optimum from both
the ergo nomic and ecological aspects.
If the brightness is further reduced by the user, this new setting is used during
the next call of the ECO operating mode.
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Selecting the input signal
INPUT
VGA
HDMI
DisplayPort
► Press th
e
button to open the INPUT setting window.
► Press the
/ button to select the desired monitor port.
► Press
the
buttontoconfirm the selected monitor port or to c lose
the wi
ndow without making any changes.
Fujitsu 27
To Next Page
Loading...
Need help?
General