Why won't my Fujitsu B22T-7 LED proGREEN Monitor turn on?
If your Fujitsu Monitor shows no screen display and the power indicator does not light up, check whether the power cable on the monitor is connected correctly and check whether the computer is switched on.
How to reset picture settings on Fujitsu Monitor?
If the picture on your Fujitsu Monitor is wrongly adjusted, run the Factory Recall function in the OSD menu. The Auto Processing message appears.
What to do if my Fujitsu B22T-7 LED proGREEN says 'No Signal'?
If your Fujitsu Monitor displays the message 'No Signal', ensure the data cable is securely connected to the monitor port on your computer and verify that your computer is powered on.
Why is my Fujitsu B22T-7 LED proGREEN Monitor screen black but the power light is on?
If your Fujitsu Monitor displays no screen but the power indicator is lit, first, check that your computer is switched on. Next, check that the monitor's data cable is correctly attached to the computer. Then, press any key on the keyboard in case the computer is in power saving mode. Finally, alter the brightness and/or contrast settings until you get a picture.
How to fix 'Frequency out of range' error on my Fujitsu B22T-7 LED proGREEN?
If your Fujitsu Monitor displays 'Frequency out of range', it means the input signal doesn't match the monitor's technical data. Adjust the video frequency range using your computer's software or display adapter settings. Alternatively, set a different screen resolution using the computer software.
Why is my Fujitsu B22T-7 LED proGREEN Monitor picture shaking?
If your Fujitsu Monitor picture is shaking, check whether the data cable is correctly attached to the monitor port on the computer. If the issue persists, press the AUTO button to conduct the auto-adjustment of the screen.
How to fix picture noise on Fujitsu Monitor?
If the picture on your Fujitsu Monitor has disturbances like horizontal lines or picture noise, press the AUTO button to conduct the auto-adjustment of the screen.
General| 3D | No |
|---|---|
| Panel type | TN |
| Pixel pitch | 0.248 x 0.248 mm |
| Aspect ratio | 16:9 |
| Display surface | Matt |
| Display diagonal | 21.5 \ |
| Display technology | LED |
| Vertical scan range | 56 - 76 Hz |
| Horizontal scan range | 30 - 82 kHz |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720i, 720p |
| Viewable size, vertical | 268 mm |
| Viewing angle, vertical | 170 ° |
| Contrast ratio (dynamic) | 20000000:1 |
| Contrast ratio (typical) | 1000:1 |
| Display number of colors | 16.78 million colors |
| Viewable size, horizontal | 476 mm |
| Display brightness (typical) | 250 cd/m² |
| Supported graphics resolutions | 1366 x 768, 1440 x 900, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA) |
| On/off switch | - |
| Mean time between failures (MTBF) | 70000 h |
| HDCP | Yes |
| USB hub version | 2.0 |
| DisplayPorts quantity | 0 |
| Headphone connectivity | 3.5 mm |
| USB Type-A downstream ports quantity | 4 |
| RMS rated power | 3 W |
| Number of speakers | 2 |
| Pivot angle | 0 - 90 ° |
| LED indicators | Power |
| Tilt angle range | -5 - 35 ° |
| Cable lock slot type | Kensington |
| Panel mounting interface | 100 x 100 mm |
| On Screen Display (OSD) languages | ARA, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, ITA, JPN, NOR, POL, POR, RUS, SWE, TUR |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (off) | 0.2 W |
| Power consumption (standby) | - W |
| Power consumption (typical) | 22 W |
| Power consumption (PowerSave) | 0.3 W |
| Certification | CE 2004/108/EEC, EN 60950, RoHS, WEEE, IT-Eco |
| Product color | Black |
| Operating temperature (T-T) | 5 - 35 °C |
| Package weight | 7000 g |
| Cables included | AC, Audio (3.5mm), DVI, USB, VGA |
| Sustainability certificates | EPEAT Gold, ENERGY STAR |
Weight and Dimensions| Depth (with stand) | 200 mm |
|---|---|
| Height (with stand) | 339 mm |
| Weight (with stand) | 5800 g |
| Depth (without stand) | 61 mm |
| Width (without stand) | 516 mm |
| Height (without stand) | 320 mm |
| Weight (without stand) | 3100 g |
Details on setting resolution and refresh rate for optimal ergonomic display.
Explains symbols, fonts, and cross-references used in the manual for clarity.
Essential safety regulations for data processing equipment in office environments.
Guidelines for using the supplied power cable and replacement criteria.
Instructions for safely transporting the device in its original packaging.
Instructions on how to clean the display surface and casing safely.
States compliance with EU directives for electromagnetic compatibility and low voltage.
Information on environmentally sound disposal and recycling of the device.
Steps for unpacking the device and verifying the delivery contents.
Ensures sufficient ventilation by keeping air inlet/outlet openings clear.
Provides guidance on positioning the monitor and workstation for ergonomics.
Instructions for securely attaching the monitor base to the monitor.
How to adjust the monitor's height by approximately 130 mm.
Instructions for adjusting the monitor's tilt from -3° to +35°.
Steps to remove the monitor base for attaching swivel arms or similar accessories.
Provides safety information and overview for connecting the monitor.
Details on connecting data, audio, and USB cables to the monitor.
Instructions for connecting monitor cables to the computer ports.
Instructions on how to turn the monitor on and off using the switch.
Information on power saving modes and their effects on consumption.
Introduces how to adapt the screen display to the display adapter.
How to make settings directly using the monitor's control panel buttons.
Guide to selecting the preferred language for the On-Screen Display menu.
How to perform auto-adjustment for optimal picture quality and position.
Instructions for selecting the desired monitor connection type (VGA, DVI, HDMI).
Method to lock the OSD menu to prevent unauthorized changes.
How to switch the ECO operating mode on or off to reduce power consumption.
How to lock the ON/OFF switch to prevent accidental changes.
Guide to navigating and using the integrated OSD menu for settings.
Adjusting display brightness, contrast, black level, and auto contrast settings.
Adjusting phase, clock, H/V position, and expansion for picture quality.
Controls for setting volume and muting integrated loudspeakers.
Selecting colour temperature (sRGB, Kelvin) and adjusting colour ratios.
Configuring OSD language, timeout duration, and rotation.
Configuring input select, DDC-CI, ACR, and factory reset.
Accessing model designation, serial number, resolution, and frequency info.
Lists common issues like no display, no signal, and provides troubleshooting steps.
Addresses vertical/horizontal picture disturbances and causes for a dark screen.
Provides physical dimensions, weight, and image size specifications.
Details video input, synchronization, frequency, refresh rate, and power supply.
Specifies rated and limit ranges for operation temperature and humidity.
Explains the VESA-DDC interface for communication between monitor and computer.
Information on factory-set picture position and size for optimal operation.
Lists common horizontal frequencies, refresh rates, and screen resolutions.
Details the pin configuration and meaning for the SUB D (VGA) connector.
Details the pin configuration and meaning for the DVI-D connector.
Details the pin configuration and meaning for the HDMI connector.
To Next Page