Operation
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the
ECO
/ button to switch the ECO operating mode on or off.
The message ECO Mode ein or ECO Mode off appears.
If the ECO operating mode is activated, the fo llowing OSD settings are c hanged :
Colour
6,500 K
Brightness
reduced
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Locking the ON/OFF button
The ON/OFF sw itch can be locked to prevent accidental or unauthorised
changes to the monitor settings.
► Press and hold th e
ECO
/ and
INPUT
/ buttons at the sam e time for a few seconds.
The message Power
button locked / unlocked is displayed.
Proceed in the s
ame way to release the locked O N/O FF switch again.
23
To Next Page
Loading...
