Why is the picture shaking on my Fujitsu B19-6 LED and how to fix it?
If the picture on your Fujitsu Monitor is shaking, check whether the data cable for the monitor is correctly attached to the monitor port on the computer. You can also press the AUTO button to conduct the auto-adjustment of the screen.
What to do if there is no screen display but power indicator is lit on Fujitsu Monitor?
If your Fujitsu Monitor's power indicator is lit but there's no screen display, first ensure that your computer is switched on. Also, verify that the data cable is correctly attached to the monitor port on the computer. Try pressing any key on the computer keyboard in case the computer is in power saving mode. You may also try to alter the brightness and/or contrast until you get a picture.
How to fix a Fujitsu B19-6 LED when there is no screen display and the power indicator does not light up?
If there is no screen display and the power indicator does not light up on your Fujitsu Monitor, check these things: - Ensure the ON/OFF switch on the monitor is switched on. - Verify that the power cable on the monitor is correctly connected. - Confirm that the computer is switched on.
What to do if my Fujitsu B19-6 LED Monitor says 'No Signal'?
If your Fujitsu Monitor displays a 'No Signal' message, verify that the data cable for the monitor is correctly attached to the monitor port on the computer. Also, ensure that the computer is switched on.
How to fix 'Frequency out of range' error on Fujitsu B19-6 LED?
If your Fujitsu Monitor displays a 'Frequency out of range' message, it means the input signal does not correspond to the technical data for the monitor. Adjust the video frequency range using the computer software (refer to the documentation for the computer or display adapter). You can also set a different screen resolution using the computer software (refer to the documentation for the computer or display adapter).
How to correct the picture position on a Fujitsu B19-6 LED Monitor?
If the picture position on your Fujitsu Monitor is not correct, it might be because the monitor recognizes an undefined mode. Try pressing the AUTO button to conduct the auto-adjustment of the screen.
How to resolve picture disturbances like horizontal lines or noise on Fujitsu Monitor?
If you are experiencing picture disturbances such as horizontal lines or picture noise on your Fujitsu Monitor, press the AUTO button to conduct the auto-adjustment of the screen.
How to get rid of vertical lines on Fujitsu Monitor screen?
If you are experiencing picture disturbances such as vertical lines on your Fujitsu Monitor, press the AUTO button to conduct the auto-adjustment of the screen.
Why is the screen on my Fujitsu B19-6 LED Monitor becoming darker?
The screen of your Fujitsu Monitor becomes darker because the background lighting has a limited lifetime. Contact our Service Desk.
General| Screen Size | 19 inches |
|---|---|
| Panel Type | TN |
| Resolution | 1280 x 1024 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Aspect Ratio | 5:4 |
| Connectivity | VGA |
| Input Ports | VGA |
Covers essential safety regulations for device operation and handling.
Covers initial device setup, ventilation, and ergonomic workstation configuration.
Detailed instructions for connecting the monitor to the computer and power.
Explains how to power the monitor on/off and describes the LED indicator status.
Details power-saving functions, including ECO mode and its effects on power consumption.
Checks for no screen display, power indicator issues, and 'No Signal' messages.
Troubleshooting steps for incorrect picture position, shaking, or general adjustment problems.
Addresses issues with picture disturbances (lines, noise) and screen darkening due to backlight.
To Next Page