Fujitsu B19-6 LED User Manual

Technical specification
Ambient condition s B19-6 LED B22W-6 LE D
Environment class 3K2, DIN IEC 721
Rated range of operation
Humidity
Limit range of opera tion
5 °C .... 35 °C
15% .... 85 %
5 °C .... 35 °C
5 °C .... 35 °C
15% .... 85 %
5 °C .... 35 °C
VESA-DDC-compatible VGA interface
Your monitor is e quipped with a VESA-DDC-comp atible VGA interface. V ESA-DD C (Video
Electronics St andard Association, Display Data Channel) is used as the communications
interface betwe en the monitor and t he computer. If the computer is eq uipped with a
VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring
optimum operation from the monitor and select the appropriate settings.
Preset operating modes
The picture position and size have been optimised at the factory for the operating
modes listed above. De pending on the graphics card used, it may be necessary
to adjust the display position or size. In this case you can change and save the
settings (see chapter "
Changing the monitor settings", Page 20).
For ergonomic reasons, we recommend a screen resolution of 168 0 x
1050 pixels (B22W-6 LED) or 1280 x 1024 pixels (B19-6 LED). Because
of the technology used (active mat rix), an LCD monitor p rovides a totally
flicker-free picture, even with a refresh rate of 60 Hz.
Most frequent operating modes
Horizontal frequency Refresh rate Screen resolution
31.5 kHz 70 Hz 720 x 400
31.5 kHz 60 Hz 640 x 480
37.5 kHz 75 Hz 640 x 480
37.9 kHz 60 Hz 800 x 600
46.9 kHz 75 Hz 800 x 600
48.4 kHz 60 Hz 1024 x 768
60.0 kHz 75 Hz 1024 x 768
63.7 kHz 60 Hz
1280 x 1024 (native B19-6 LED)
80.3 kHz 75 Hz 1280 x 10 24
65.0 kHz 60 Hz
1680 x 1050 (native B22W-6 LED)
34 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals

Fujitsu B19-6 LED Specifications

General

Brand	Fujitsu
Model	B19-6 LED
Category	Monitor
Language	English