Explanatory inform ation about stan
dard ISO 9241-307
Explanatory information abou
t
standard ISO 9241-307
Permanently un lit or lit p ixels
Today’s prod uction techniques cannot guarantee an absolutely fault-free screen display. Depending
on the total number of pixels (resolution), there may be a fe w constantly lit or unlit pixels or subpixels.
Pixel
A pixel consists of 3 subpixels, normally red, green and blue. A pixel is
the smallest element that can be generated by complete functionality of
the display.
Subpixel
A subpixel is a separately addressable int ernal s tructure within a pixel that
enhances the pixel function.
The maximum permitted n umber of faulty pixels is stipulated in the international standard ISO
9241-307. In accordance w ith standard ISO 9241-3, LCD monitors by F ujitsu comply with Class II
for low resolutions and Class I for resolutions of 1680 x 1050 (176 4000 pixel) and higher.
Examples:
A flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 = 1310720 pixels. Each pixel
consists o f three s ubpixels (red, green and blue), so there are almost 3.9 million subpixels in total.
According to ISO 9241-3 (Class II), a maximum of 3 lit and 3 unlit pixels plus 7 lit or 13 unlit subpixels,
or a corresponding combination, may be faulty (1 lit subpixel counts as two unlit subpixels).
A flat-screen monitor with a resolution of 1920 x 1080 has 1920 x 1080 = 2073600 pixels. Each pixel
consists o f three s ubpixels (red, green and blue), so there are almost 6.2 million subpixels in total.
According to ISO 9241-3 (Class I), a maximum of 2 lit and 2 u nlit pixels plus 5 lit or 10 unlit subpixels,
or a corresponding combination, may be faulty (1 lit subpixel counts as two unlit subpixels).
32 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
General