What to do if my Fujitsu B17-5 ECO says 'No Signal'?
If your Fujitsu Monitor displays a 'No Signal' message, ensure the data cable is correctly attached to the monitor port on your computer and verify that the computer is switched on.
What to do if there is no screen display but the power indicator is lit on my Fujitsu Monitor?
If your Fujitsu Monitor's power indicator is lit but there's no screen display, first ensure that your computer is switched on. Next, check that the monitor's data cable is correctly attached to the computer port. Then, press any key on the keyboard in case the computer is in power saving mode. Finally, adjust the brightness and/or contrast settings until a picture appears.
How to fix a Fujitsu B17-5 ECO when there is no screen display and the power indicator is off?
If your Fujitsu Monitor shows no screen display and the power indicator is off, check that the main switch at the rear of the monitor is switched on. Also, verify that the power cable is correctly connected to the monitor and ensure that the computer is switched on.
How to fix 'Frequency out of range' error on Fujitsu B17-5 ECO Monitor?
If your Fujitsu Monitor displays a 'Frequency out of range' error, it means the input signal doesn't match the monitor's technical specifications. Adjust the video frequency range using your computer's software (refer to your computer or display adapter documentation). Alternatively, set a different screen resolution through your computer's software (refer to your computer or display adapter documentation).
Why is the picture shaking on my Fujitsu B17-5 ECO and how to fix it?
If the picture on your Fujitsu Monitor is shaking, first check that the data cable is correctly attached to the monitor port on the computer. If the issue persists, press the EXIT / AUTO button to perform auto-adjustment of the screen.
How to resolve picture disturbances (vertical lines) on Fujitsu Monitor?
To resolve picture disturbances (vertical lines) on your Fujitsu Monitor, press the EXIT / AUTO button to perform auto-adjustment of the screen.
How to eliminate picture disturbances like horizontal lines or noise on a Fujitsu B17-5 ECO Monitor?
To eliminate picture disturbances such as horizontal lines or picture noise on your Fujitsu Monitor, press the EXIT / AUTO button to perform auto-adjustment of the screen.
What to do if the picture position is not correct on my Fujitsu B17-5 ECO Monitor?
If the picture position is not correct on your Fujitsu Monitor, press the EXIT / AUTO button to perform auto-adjustment of the screen. This will correct the undefined mode.
What to do if the picture is wrongly adjusted on my Fujitsu Monitor?
If the picture on your Fujitsu Monitor is wrongly adjusted, press the SELECT / MENU button to activate the Factory Recall function. The Auto Processing message will appear.
Why does the screen become darker on my Fujitsu B17-5 ECO Monitor?
The screen on your Fujitsu Monitor may become darker because the background lighting has a limited lifetime. If your monitor display becomes too dark, the background lighting will have to be replaced. Please contact our help desk.
General| Screen Size | 17 inches |
|---|---|
| Resolution | 1280 x 1024 |
| Aspect Ratio | 5:4 |
| Panel Type | TN |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Viewing Angle (Horizontal) | 170° |
| Viewing Angle (Vertical) | 160° |
| Connectivity | VGA |
To Next Page