Operation
Changing the monitor settings
When putting the monitor into opera tion for the fi rst time, the screen display should
be optimally adapted to the display adapter used.
Changing the mon itor settings
with the butto ns
of the control panel
The buttons of the control panel have two functions. With the OSD menu not
activated, you can make the following settings directly:
SELECT/ MENU
INPUT
EXIT / AUTO
123
ECO
1 = Buttons for the OSD me nu (On-S cr een
Display)
2 = Power supply indicator
3 = ON/OFF switch
Performing auto-adjustment of the monitor
► Press the
EXIT / AUTO
button for about 1 second.
The Auto Processing message appears
Picture quality and p osition are set to optimum values for your system.
Selecting inp ut signal (D-SUB/DVI-D)
► Press the Back /
INPUT
buttontoopentheInput select setting window.
► Press the Forwards / ECO button or the Back /
INPUT
button to select the
desired monitor connection (VGA or DVI).
This setting window can also be called when the OSD menu is locked.
16 A26361-K1317-Z220-1-7619, edition 2
To Next Page
Loading...
