Fujitsu B22W-5 ECO - User Manual

Questions and Answers

M
Matthew ThomasAug 15, 2025
What to do if there is no screen display but the power indicator is lit on my Fujitsu Monitor?
- N
  Nathan HughesAug 15, 2025
  If your Fujitsu Monitor's power indicator is on but there's no display, first ensure that your computer is powered on. Also, verify that the monitor's data cable is securely connected to the correct port on your computer. Try pressing any key on the computer keyboard, as it may be in power saving mode. Finally, adjust the brightness and contrast settings until a picture appears.
K
Kristin DorseyAug 18, 2025
How to fix a Fujitsu B22W-5 ECO with no screen display when the power indicator is off?
- R
  Regina ParkerAug 18, 2025
  If your Fujitsu Monitor shows no screen display and the power indicator isn't lit, check if the monitor's ON/OFF switch is turned on. Ensure the power cable is correctly connected to the monitor. Also, verify that your computer is switched on.
C
Christopher Bullock DDSAug 21, 2025
What to do if my Fujitsu B22W-5 ECO says 'No Signal'?
- M
  moorejacobAug 22, 2025
  If your Fujitsu Monitor displays a 'No Signal' message, first check that the data cable is correctly attached to the monitor port on your computer. Secondly, ensure that your computer is switched on.
A
Andre SanchezAug 25, 2025
Why is the picture shaking on my Fujitsu B22W-5 ECO and how can I fix it?
- G
  glendashahAug 26, 2025
  If the picture on your Fujitsu Monitor is shaking, first ensure that the data cable for the monitor is correctly attached to the monitor port on the computer. If the issue persists, press the EXIT / AUTO button to perform auto-adjustment of the screen.
B
burtonkimberlyAug 27, 2025
How to resolve 'Frequency out of range' error on my Fujitsu B22W-5 ECO?
- I
  irussellAug 28, 2025
  If your Fujitsu Monitor displays a 'Frequency out of range' message, it means the input signal doesn't match the monitor's technical specifications. Adjust the video frequency range using your computer's software, referring to its documentation. Alternatively, set a different screen resolution using the computer software.
M
morgantaraAug 31, 2025
How to fix vertical lines (picture disturbances) on Fujitsu B22W-5 ECO Monitor?
- L
  lopezjasonAug 31, 2025
  If you are experiencing picture disturbances such as vertical lines on your Fujitsu Monitor, press the EXIT / AUTO button to perform auto-adjustment of the screen.
C
christopher02Sep 2, 2025
What causes horizontal lines or picture noise on my Fujitsu Monitor, and how do I fix it?
- J
  Jose Delacruz Jr.Sep 2, 2025
  If you are experiencing picture disturbances like horizontal lines or picture noise on your Fujitsu Monitor, press the EXIT / AUTO button to perform auto-adjustment of the screen.
R
Ryan PowellSep 5, 2025
What to do if the picture position is not correct on my Fujitsu Monitor?
- A
  Alan BrooksSep 5, 2025
  If the picture position is not correct on your Fujitsu Monitor, it might be recognizing an undefined mode. Press the EXIT / AUTO button to perform auto-adjustment of the screen.
A
Andrew JohnsonSep 8, 2025
How to fix a wrongly adjusted picture on my Fujitsu B22W-5 ECO?
- S
  Savannah MartinezSep 8, 2025
  If the picture on your Fujitsu Monitor is wrongly adjusted, press the SELECT / MENU button to activate the Factory Recall function. The Auto Processing message will appear.
R
rmaySep 12, 2025
Why is the screen on my Fujitsu Monitor becoming darker?
- M
  Ms. Tiffany HallSep 12, 2025
  If your Fujitsu monitor screen becomes darker, it could be due to the background lighting reaching the end of its limited lifetime. If the display becomes too dark, the background lighting will need replacement. You may contact our help desk.

Summary

Important Notes and Safety

Safety Instructions

Essential safety regulations for using data processing equipment in an office environment.

Power Cable Guidelines

Proper usage and replacement guidelines for the device's power cable.

Getting Started Guide

Unpacking and Checking the Delivery

Initial Device Setup

Connecting the Monitor

Connecting Cables to the Monitor

Connecting Cables to the Computer

Operating Your Monitor

Switching the Monitor On and Off

Instructions on how to power the monitor on and off, including LED indicator status.

Notes on Power Management

Changing Settings via Control Panel Buttons

How to adjust monitor settings directly using the control panel buttons.

Performing Monitor Auto-Adjustment

Activating;Deactivating ECO Operating Mode

Changing Settings Using the OSD Menu

Overview of navigating and using the On-Screen Display (OSD) menu for adjustments.

OSD Menu Functions: Brightness and Contrast

Detailed explanation of adjusting brightness, contrast, black level, and auto level.

OSD Menu Functions: Picture Size and Position

How to adjust picture phase, clock, horizontal, and vertical position.

OSD Menu Functions: Advanced Settings

Troubleshooting Common Issues

No Screen Display Troubleshooting

Steps to resolve issues when the screen remains blank or the power indicator is off.

No Signal Message Troubleshooting

Steps to resolve 'No Signal' or 'Frequency out of range' messages.

Picture Position and Shaking Issues

Solutions for incorrect picture position or screen shaking.

Fixing Wrongly Adjusted Pictures

How to fix a picture that appears wrongly adjusted or distorted.

Picture Disturbances Troubleshooting

Steps to resolve vertical and horizontal picture disturbances or noise.

Screen Darkening Issues

Technical Specifications

Fujitsu B22W-5 ECO Specifications

General

Screen Size	21.5 inches
Panel Type	TN
Brightness	250 cd/m²
Contrast Ratio	1000:1
Response Time	5 ms
Aspect Ratio	16:9
Dynamic Contrast Ratio	1000000:1
Viewing Angle (Horizontal)	170°
Viewing Angle (Vertical)	160°
Color Support	16.7 million colors
Weight	3.5 kg
Resolution	1920 x 1080 (Full HD)
Connectivity	VGA, DVI-D