Operation
Activate/deactivate ECO operating mode
The power consumption of the dev ice can be decre ase d by reducing
the brightness of the pictu re.
► Press th e Forwards / ECO button to switch the ECO operating mode on o r off.
The message Ac tion was executed appears.
If the ECO operating m ode is activated, the following OSD settings are changed:
Colour
temperature
6500 K
Brightness
reduced
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Locking the OSD menu
The O SD menu can be locked to preven t accidental or unauthorised changes to the monitor s ettings.
► Press and hold the
SELECT/ME
NU
button for a few seconds while you switch
on the monitor with the ON/OF F switc h .
The Action was executed mess
age appears.
Please proceed in the same
manner to release the locked OSD m en u again.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unautho rised
changes to the monitor settings.
Please proceed in the same manner to release the locked ON/OF F switch again.
Changing the monitor settings using the OSD menu
With the buttons on the control panel, you can call up and use the integrated
OSD (On-Screen Display) menu.
The OSD menu is available in various languages. The English menu names are
used in the following description (def ault setting). You c an select another lan guage
using the OSD Language function in the OSD Setup menu.
16 A26361-K1320-Z220-1-7619, edition 2
To Next Page
Loading...
