Operation
Setting functions in the Advanced menu
Call up the Advanced setting window
Input select
Selecting the input signal
This function allows yo u to switch the monitor from analogue to digital mode
and vice versa, when two signal sources are connected.
This requires t hat the graphic card used supports this function.
DDC-CI
Activation/deactivation of the DDC -CI
On = The DDC-CI function is enabled (standard setting)
Off = The DDC-CI function is disabled
Factory Recall
Activating the factory settings
With this function all s ettings a re reset to the facto ry settings without
prompting for confirmation .
Press the
SELECT/MENU
button to activate the function. The Auto
Processing message is displaye d.
Displaying information
Call the Informatio n setting w indo w
With this function the m ode l designation, serial number, resolution, H/V
frequency, input s ignal and polarity of the synchron isation s ignal are
displayed.
20 A26361-K1320-Z220-1-7619, edition 2
To Next Page
Loading...
