EasyManua.ls Logo

Fujitsu B22W-5 ECO - VESA-DDC-Compatible VGA Interface; Preset Operating Modes; Most Frequent Operating Modes

Fujitsu B22W-5 ECO
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical specication
Environmental conditions
Environment class 3K2, DIN IEC 721
Rated range of operation
Humidity
15 °C .... 35 °C
20 % .... 85 %
Limit range o f operation
Humidity
5 °C .... 35 °C
20 % .... 85 %
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-comp atible VGA interf ace. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used a s the communications
interface between the monitor and t he computer. I f the computer is equipped with a
VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring
optimum operation from the monitor and select the appropriate settings.
Preset operating modes
The picture position and s
ize have been optimised at t he factory for the operating
modes listed above. Depen
ding on the graphics card use d, it may be necessary
to adjust the display posi
tion or size. In this case you can change and save the
settings (see ch apter "
Changing the monitor settings", Page 15).
For ergonomic reasons,
a screen resolution of 1680 x 1050 pixels is recommended.
Because of the technolo
gy used (active matrix), an LCD monitor p rovide s a
totally icker-free pi
cture, even with a refresh rate of 60 Hz.
Most frequent operating modes
Horizontal frequency Refresh rate Screen resolution
31.5 kHz 70 Hz 720 x 400
31.5 kHz 60 Hz 640 x 480
37.5 kHz 75 Hz 640 x 480
37.9 kHz 60 Hz 800 x 600
46.9 kHz 75 Hz 800 x 600
48.4 kHz 60 Hz 1024 x 768
60.0 kHz 75 Hz 1024 x 768
65.0 kHz 60 Hz 1680 x 1050
26 A26361-K1320-Z220-1-7619, edition 2

Related product manuals