Why is the picture shaking on my Fujitsu Monitor and how to fix it?
If the picture on your Fujitsu Monitor is shaking, check whether the data cable for the monitor is correctly attached to the monitor port on the computer. You can also press the AUTO button to conduct the auto-adjustment of the screen.
What to do if there is no screen display but power indicator is lit on Fujitsu B22W-6 LED?
If your Fujitsu Monitor's power indicator is lit but there's no screen display, first ensure that your computer is switched on. Also, verify that the data cable is correctly attached to the monitor port on the computer. Try pressing any key on the computer keyboard in case the computer is in power saving mode. You may also try to alter the brightness and/or contrast until you get a picture.
How to fix a Fujitsu Monitor when there is no screen display and the power indicator does not light up?
If there is no screen display and the power indicator does not light up on your Fujitsu Monitor, check these things: - Ensure the ON/OFF switch on the monitor is switched on. - Verify that the power cable on the monitor is correctly connected. - Confirm that the computer is switched on.
What to do if my Fujitsu B22W-6 LED Monitor says 'No Signal'?
If your Fujitsu Monitor displays a 'No Signal' message, verify that the data cable for the monitor is correctly attached to the monitor port on the computer. Also, ensure that the computer is switched on.
How to fix 'Frequency out of range' error on Fujitsu B22W-6 LED Monitor?
If your Fujitsu Monitor displays a 'Frequency out of range' message, it means the input signal does not correspond to the technical data for the monitor. Adjust the video frequency range using the computer software (refer to the documentation for the computer or display adapter). You can also set a different screen resolution using the computer software (refer to the documentation for the computer or display adapter).
How to correct the picture position on a Fujitsu B22W-6 LED?
If the picture position on your Fujitsu Monitor is not correct, it might be because the monitor recognizes an undefined mode. Try pressing the AUTO button to conduct the auto-adjustment of the screen.
How to resolve picture disturbances like horizontal lines or noise on Fujitsu B22W-6 LED Monitor?
If you are experiencing picture disturbances such as horizontal lines or picture noise on your Fujitsu Monitor, press the AUTO button to conduct the auto-adjustment of the screen.
How to get rid of vertical lines on Fujitsu Monitor screen?
If you are experiencing picture disturbances such as vertical lines on your Fujitsu Monitor, press the AUTO button to conduct the auto-adjustment of the screen.
Why is the screen on my Fujitsu B22W-6 LED Monitor becoming darker?
The screen of your Fujitsu Monitor becomes darker because the background lighting has a limited lifetime. Contact our Service Desk.
Identifies the manual's intended users and provides contact information for technical assistance.
Details technical display features like resolution, refresh rates, and ergonomic recommendations.
Explains symbols and formatting used for warnings, important information, and text types.
Covers safety regulations for office equipment use and specific device handling precautions.
Provides instructions for power cable use, replacement, and safe device transportation.
Details proper methods for cleaning the monitor's display surface and casing.
Covers CE marking and Energy Star compliance for the monitor.
Provides guidance and contacts for environmentally responsible disposal of the device.
Steps for unpacking, verifying contents, and checking for any transport damage.
Ensures proper ventilation by keeping air inlet and outlet openings clear during setup.
Guidance on positioning the monitor and keyboard for an optimal ergonomic setup.
Instructions for mounting the monitor base and adjusting height, inclination, and rotation.
Guides on rotating to portrait mode and removing the base for mounting accessories.
Details on connecting data, audio, power, and USB cables to the monitor and computer.
Instructions for powering the monitor on/off and understanding the power LED status.
Details power-saving features, including support for computer power modes and ECO mode.
Guide to navigating and using the On-Screen Display (OSD) menu for adjustments.
Explains the dual functions of control panel buttons and the use of softkeys for navigation.
Covers adjusting brightness, contrast, picture size, position, and colour temperature.
Details advanced options like input selection, DDC-CI, factory recall, and viewing monitor info.
Steps to resolve blank screens and power indicator problems.
Troubleshooting for 'No Signal' messages and incorrect input frequency.
Solutions for incorrect picture position, shaking, or general wrong adjustments.
Addresses vertical/horizontal disturbances, picture noise, and dark screens.
Defines pixels and subpixels and explains ISO standards for acceptable pixel faults.
Details dimensions, weight, electrical specifications, and power consumption.
Specifies ambient conditions, VESA-DDC compatibility, and preset operating modes.
Provides pinout diagrams and descriptions for SUB D, DVI-D, and DisplayPort connectors.
General| 3D | No |
|---|---|
| HD type | - |
| Pixel pitch | 0.282 x 0.282 mm |
| Aspect ratio | 16:10 |
| Display diagonal | 22 \ |
| Display resolution | 1680 x 1050 pixels |
| Viewable size diagonal | 559 mm |
| Viewable size, vertical | 296 mm |
| Contrast ratio (dynamic) | 2000000:1 |
| Contrast ratio (typical) | 1000:1 |
| Display number of colors | 16.78 million colors |
| Viewable size, horizontal | 474 mm |
| Digital vertical frequency | 56 - 76 Hz |
| Digital horizontal frequency | 30 - 82 kHz |
| Display brightness (typical) | 250 cd/m² |
| Power requirements | AC 100V - 240V@50-60Hz, AC/DC |
| Mean time between failures (MTBF) | 70000 h |
| HDCP | Yes |
| USB hub version | 2.0 |
| DVI-I ports quantity | 0 |
| USB Type-A downstream ports quantity | 5 |
| RMS rated power | 2 W |
| Number of speakers | 2 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 28 W |
| Power consumption (PowerSave) | 0.3 W |
| Certification | CE, TÜV GS, GOST, FCC B, cUL, TCO Displays 5.0, ENERGY STAR 5.0 |
| Product color | White |
| Pivot angle | 0 - 90 ° |
| Tilt angle range | -5 - 35 ° |
| Height adjustment | 110 mm |
| Cable lock slot type | Kensington |
| Panel mounting interface | 100 x 100 mm |
| On Screen Display (OSD) languages | ARA, CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, ITA, NOR, POL, POR, RUS, SWE, TUR |
| Package weight | 8900 g |
Weight and Dimensions| Depth (with stand) | 180 mm |
|---|---|
| Height (with stand) | 370 mm |
| Weight (with stand) | 7100 g |
| Depth (without stand) | 60 mm |
| Width (without stand) | 508 mm |
| Height (without stand) | 343 mm |
| Weight (without stand) | 4200 g |
To Next Page