What to do if Fujitsu B23T-6 LED says 'No Signal'?
If your Fujitsu Monitor displays a 'No Signal' message, ensure that the data cable is correctly attached to the monitor port on your computer. Also, verify that your computer is switched on.
How to fix Fujitsu B23T-6 LED when the picture is shaking?
If the picture on your Fujitsu monitor is shaking, check that the data cable is correctly attached to the monitor port on your computer. If the issue continues, press the AUTO button to perform an auto-adjustment of the screen.
How to fix Fujitsu B23T-6 LED with no screen display and power indicator not lighting up?
If your Fujitsu monitor shows no screen display and the power indicator isn't lit, check that the power cable is correctly connected to the monitor. Also, ensure that the computer is switched on.
What to do if the picture on Fujitsu Monitor has disturbances (vertical lines)?
If you're experiencing picture disturbances such as vertical lines on your Fujitsu monitor, try pressing the AUTO button to conduct an auto-adjustment of the screen.
What to do if the picture on Fujitsu Monitor has disturbances (horizontal lines, picture noise)?
If you notice horizontal lines or picture noise on your Fujitsu monitor, press the AUTO button to perform an auto-adjustment of the screen.
How to correct the picture position on Fujitsu Monitor?
If the picture position on your Fujitsu monitor is not correct, press the AUTO button to conduct the auto-adjustment of the screen.
What to do if Fujitsu Monitor displays 'Frequency out of range' error?
If your Fujitsu monitor displays a 'Frequency out of range' error, it means the input signal doesn't match the monitor's technical specifications. Adjust the video frequency range using your computer's software, referring to its documentation. Alternatively, set a different screen resolution using the computer software, consulting its documentation for instructions.
How to fix wrongly adjusted picture on Fujitsu B23T-6 LED?
To correct a wrongly adjusted picture on your Fujitsu monitor, run the Factory Recall function in the OSD menu. The Auto Processing message will then appear.
Why does the Fujitsu Monitor screen become darker?
The screen of your Fujitsu monitor may be getting darker because the background lighting has a limited lifetime. In this case, contact our Service Desk.
General safety regulations for data processing equipment and office use.
Steps for unpacking and verifying the monitor package contents.
Basic instructions for device setup and ventilation.
Guidance on positioning the monitor for optimal ergonomics and viewing.
General information on connecting the monitor and safety precautions.
Details on connecting various data cables to the monitor ports.
Instructions for connecting the monitor to the computer's ports.
Procedure for powering the monitor on and off, including LED indicator status.
Initial setup for optimal screen display adaptation to the display adapter.
How to automatically set picture quality and position for optimal viewing.
Guide to using the On-Screen Display menu for comprehensive adjustments.
General| Screen Size | 23 inches |
|---|---|
| Panel Type | IPS |
| Backlight | LED |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Dynamic Contrast Ratio | 20, 000, 000:1 |
| Response Time | 5 ms |
| Viewing Angle (Horizontal) | 178° |
| Viewing Angle (Vertical) | 178° |
| VESA Mount Compatible | Yes (100 x 100 mm) |
| Aspect Ratio | 16:9 |
| Color Support | 16.7 million colors |
| Resolution | 1920 x 1080 (Full HD) |
| Connectivity | DVI, VGA, DisplayPort |
| Built-in Speakers | Yes |
To Next Page
