What to do if my Fujitsu B24-8 TE Pro says 'No Signal'?
If your Fujitsu Monitor displays a 'No Signal' message, first, ensure the data cable is securely connected to the monitor port on your computer. Also, verify that your computer is powered on.
Why is my Fujitsu B24-8 TE Pro Monitor screen black but the power light is on?
If your Fujitsu Monitor's power indicator is lit but there's no screen display, try the following: * Ensure that the computer is switched on. * Verify the monitor's data cable is correctly attached to the computer. * Press any key on the keyboard in case the computer is in power saving mode. * Adjust the brightness and/or contrast settings.
How to fix a Fujitsu B24-8 TE Pro when there is no screen display and the power indicator is off?
If your Fujitsu Monitor screen is not displaying anything and the power indicator is off, check that the monitor's power cable is correctly connected. Also, ensure that the computer is switched on.
What to do if my Fujitsu B24-8 TE Pro picture is shaking?
If the picture on your Fujitsu Monitor is shaking, check that the data cable is correctly attached to the monitor port on the computer. If the issue persists, press the AUTO button to perform an auto-adjustment of the screen.
How to fix 'Frequency out of range' error on Fujitsu B24-8 TE Pro Monitor?
If your Fujitsu Monitor displays 'Frequency out of range', it means the input signal doesn't match the monitor's technical specifications. Adjust the video frequency range using your computer's software, referring to its documentation. Alternatively, set a different screen resolution using the computer software.
How to resolve vertical lines on my Fujitsu B24-8 TE Pro screen?
If your Fujitsu Monitor has picture disturbances such as vertical lines, press the AUTO button to conduct the auto-adjustment of the screen.
How to get rid of horizontal lines or picture noise on Fujitsu Monitor?
If your Fujitsu Monitor is showing horizontal lines or picture noise, press the AUTO button to conduct the auto-adjustment of the screen.
Why is the picture position not correct on my Fujitsu B24-8 TE Pro?
If the picture position on your Fujitsu Monitor is not correct, it might be recognizing an undefined mode. Press the AUTO button to conduct the auto-adjustment of the screen.
How to fix wrongly adjusted picture on Fujitsu B24-8 TE Pro Monitor?
If the picture on your Fujitsu Monitor is wrongly adjusted, run the Factory Recall function in the OSD menu. The Auto Processing message will appear.
Identifies the intended audience for the manual.
Points to where additional details can be found.
Explains symbols and formatting used in the manual.
Crucial safety guidelines for operating the device.
Information on using and replacing the power cable.
Guidelines for safely moving the monitor.
Instructions on how to clean the monitor.
Details about the device's compliance with EU directives.
Information on environmentally responsible disposal.
Steps for unboxing and verifying the monitor contents.
Instructions for positioning and preparing the monitor.
Guidance on creating an ergonomic workspace.
How to attach the monitor stand.
Instructions for changing the monitor's vertical position.
How to tilt the monitor forwards or backwards.
How to turn the monitor for portrait or landscape view.
Steps to detach the monitor stand for accessories.
Guidance on connecting cables to the monitor.
How to connect the monitor to a computer.
Procedures for powering the monitor on and off.
Information on energy-saving modes and power consumption.
Overview of adjusting display parameters.
Using physical buttons to adjust monitor settings.
How to choose the language for the on-screen display.
Instructions for enabling the energy-saving ECO mode.
How to choose between different video input sources.
How to control the monitor's audio output.
How to change the screen brightness and low blue light settings.
How to automatically optimize picture settings for VGA.
How to prevent accidental changes to OSD settings.
How to prevent accidental changes to the ON/OFF button.
Navigating the on-screen display menu for settings.
Detailed steps for adjusting brightness, contrast, black level, etc.
Choosing predefined picture settings for different uses.
Adjusting image parameters like phase, clock, sharpness, and hue.
Adjusting screen colours and selecting colour temperatures.
Configuring OSD language, timeout, and rotation.
Selecting the video input source (VGA, DVI, DP, HDMI).
Adjusting overdrive for improved focus in fast-moving images.
Enabling/disabling the Display Data Channel interface.
Resetting all settings to factory defaults.
Viewing serial number, signal input, resolution, and ECO mode.
Guidelines for selecting suitable colour combinations for readability.
Explanation of the monitor's feature to reduce blue light emission.
Explanation of pixel defects and standards compliance.
Lists common issues and their troubleshooting steps.
Identifies the monitor model (B24-8 TE Pro / B24-8 TS Pro).
Physical dimensions and weight of the monitor.
Technical specifications related to power and signals.
Operating temperature, humidity, and environment class.
Information on monitor's compatibility with VESA standards.
Factory-set display modes and resolutions.
Common screen resolutions and their refresh rates.
Supported video modes for DP/HDMI connections.
Pinout and meaning for the SUB D (VGA) connector.
Pinout and meaning for the DVI-D connector.
Pinout and meaning for the DisplayPort connector.
Pinout and meaning for the HDMI connector.
To Next Page
General