What to do if Fujitsu P24-8 TE Pro Monitor shows 'No Signal' message?
If your Fujitsu Monitor displays a 'No Signal' message, ensure the data cable is securely connected to the monitor port on your computer. Also, verify that your computer is powered on.
How to fix no screen display but power indicator is lit on Fujitsu Monitor?
If your Fujitsu Monitor's power indicator is lit but there's no screen display: * Ensure your computer is switched on. * Verify the monitor's data cable is correctly attached to the computer. * Press any key on the keyboard, as the computer may be in power saving mode. * Adjust the brightness and contrast settings.
How to fix no screen display and power indicator does not light up on Fujitsu P24-8 TE Pro?
If your Fujitsu Monitor has no screen display and the power indicator is not lit: * Check if the power cable is correctly connected to the monitor. * Ensure that the computer is switched on.
What to do if Fujitsu P24-8 TE Pro Monitor picture is shaking?
If the picture on your Fujitsu Monitor is shaking, check that the data cable is correctly attached to the monitor port on the computer. You can also try running the Auto adjust function.
What to do if Fujitsu P24-8 TE Pro Monitor displays 'Frequency out of range' error?
If your Fujitsu Monitor shows a 'Frequency out of range' message, it means the input signal doesn't match the monitor's technical specifications. Adjust the video frequency range using your computer's software or set a different screen resolution.
What to do if Fujitsu Monitor picture disturbances appear (vertical lines)?
If you are experiencing picture disturbances such as vertical lines on your Fujitsu Monitor, try running the Auto adjust function.
What to do if Fujitsu Monitor picture disturbances appear (horizontal lines, picture noise)?
If you observe horizontal lines or picture noise on your Fujitsu Monitor, try running the Auto adjust function.
Why is Fujitsu Monitor picture position not correct?
If the picture position on your Fujitsu Monitor is not correct, it might be recognizing an undefined mode. Try running the Auto adjust function.
What to do if Fujitsu Monitor picture is wrongly adjusted?
If the picture on your Fujitsu Monitor is wrongly adjusted, try running the Factory Recall function.
Why is my Fujitsu Call Indicator not recognised by the operating system?
If the Fujitsu Call Indicator is not recognized by the operating system, verify that the monitor is connected to the computer using the supplied USB cable and check if Call Indicator is enabled in the OSD menu.
General| 3D | No |
|---|---|
| Pixel pitch | 0.2745 x 0.2745 mm |
| Screen shape | Flat |
| Display diagonal | 23.8 \ |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| Vertical scan range | 56 - 76 Hz |
| Horizontal scan range | 30 - 82 kHz |
| Viewable size, vertical | 296 mm |
| Contrast ratio (dynamic) | 20000000:1 |
| Contrast ratio (typical) | 1000:1 |
| Display number of colors | 16.78 million colors |
| Viewable size, horizontal | 527 mm |
| Display brightness (typical) | 250 cd/m² |
| Supported graphics resolutions | 1280 x 1024 (SXGA), 1400 x 1050 (SXGA+), 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080) |
| On/off switch | Yes |
| USB hub version | 3.2 Gen 1 (3.1 Gen 1) |
| HDMI ports quantity | 0 |
| USB Type-A downstream ports quantity | 3 |
| RMS rated power | 2 W |
| Number of speakers | 2 |
| Product color | Gray |
| Market positioning | - |
| Tilt angle range | -5 - 35 ° |
| Cable lock slot type | Kensington |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 20 W |
| Power consumption (off) | 0.15 W |
| Annual energy consumption | 50.75 kWh |
| Power consumption (standby) | - W |
| Power consumption (typical) | 16.1 W |
| Power consumption (PowerSave) | 0.27 W |
| Sustainability certificates | ENERGY STAR |
| Cables included | AC |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
| Package weight | 7400 g |
Weight and Dimensions| Depth (with stand) | 229.4 mm |
|---|---|
| Height (with stand) | 347 mm |
| Weight (with stand) | 5600 g |
| Depth (without stand) | 63.5 mm |
| Width (without stand) | 553 mm |
| Height (without stand) | 330.2 mm |
| Weight (without stand) | 3500 g |
Identifies the document as an operating manual for the Fujitsu display.
Defines the intended audience for the manual's instructions.
Directs users to additional resources for more details.
Explains symbols and text formatting used throughout the manual.
Critical safety precautions for device operation and handling.
Details on using and replacing the power cable for the monitor.
Guidelines for safe movement and handling of the monitor.
Procedures for initial unboxing and verification of monitor contents.
Instructions for physically setting up the monitor on a desk.
Guidance on positioning the monitor for comfort and productivity.
Basic power control procedures for turning the monitor on and off.
Explanation of monitor buttons and the On-Screen Display (OSD) menu.
Details the functionality of ambient light and presence sensors.
Describes how the indicator shows communication software status.
Explains the meaning of different power supply indicator colours.
Lists power consumption figures for different operating modes.
Explains the monitor's function to reduce blue light emission.
Provides a table for suitable colour combinations for characters and backgrounds.
Explains pixel and subpixel definitions and fault tolerances.
Steps to resolve issues with a blank or non-responsive screen.
How to address the "No Signal" error message.
Guidance on changing display modes for out-of-range frequencies.
Physical characteristics and weight of the monitor.
Power supply specifications and typical power consumption.
Operating temperature, humidity, and environment class.
To Next Page