What to do if my Fujitsu P24W-6 IPS Monitor says 'No Signal'?
If your Fujitsu Monitor displays a 'No Signal' message, ensure that the data cable is securely connected to the monitor port on your computer. Also, verify that your computer is powered on.
What to do if my Fujitsu Monitor has no screen display but the power indicator is lit?
If your Fujitsu Monitor's power indicator is lit but there's no screen display, first check that your computer is switched on. Then, ensure the monitor's data cable is correctly attached to the computer port. Next, press any key on the keyboard, as the computer might be in power saving mode. Finally, adjust the brightness and/or contrast settings until a picture appears.
How to fix picture disturbances (vertical lines) on Fujitsu P24W-6 IPS Monitor?
To resolve picture disturbances like vertical lines on your Fujitsu Monitor, press the AUTO / button to enable auto-adjustment of the screen.
How to fix picture disturbances (horizontal lines, picture noise) on Fujitsu Monitor?
To address picture disturbances such as horizontal lines or picture noise on your Fujitsu Monitor, press the AUTO / button to enable the screen's auto-adjustment feature.
What to do if my Fujitsu P24W-6 IPS Monitor picture position is not correct?
If the picture position on your Fujitsu Monitor is incorrect, and the monitor recognises an undefined mode, press the AUTO / button to enable auto-adjustment of the screen.
Why does my Fujitsu Monitor say 'Frequency out of range'?
The 'Frequency out of range' message on your Fujitsu Monitor indicates that the input signal (horizontal frequency and refresh rate) doesn't match the monitor's technical specifications. Adjust the video frequency range using your computer's software. You can also try setting a different screen resolution using the computer software.
What to do if my Fujitsu P24W-6 IPS picture is shaking?
If the picture on your Fujitsu Monitor is shaking, ensure that the data cable is correctly attached to the monitor port on your computer. If the issue persists, press the AUTO / button to enable auto-adjustment of the screen.
What to do if my Fujitsu P24W-6 IPS has no screen display and the power indicator does not light up?
If your Fujitsu Monitor shows no screen display and the power indicator isn't lit, check if changing the 0W switch on the rear to setting 1 resolves the problem. Also, verify that the power cable is correctly connected to the monitor and ensure that the computer is switched on.
What to do if the picture on my Fujitsu P24W-6 IPS Monitor is wrongly adjusted?
If the picture on your Fujitsu Monitor is wrongly adjusted, run the Factory Recall function in the OSD menu. The Auto Processing message will appear.
General| Screen Size | 24 inches |
|---|---|
| Panel Type | IPS |
| Resolution | 1920 x 1080 (Full HD) |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Refresh Rate | 60 Hz |
| Color Support | 16.7 million colors |
| Color Gamut | 99% sRGB |
| Connectivity | HDMI |
| Viewing Angle | 178° |
To Next Page
