To Next PageTo Next PageWhat to do if my Fujitsu P24W-6 IPS Monitor says 'No Signal'?
If your Fujitsu Monitor displays a 'No Signal' message, ensure that the data cable is securely connected to the monitor port on your computer. Also, verify that your computer is powered on.
What to do if my Fujitsu Monitor has no screen display but the power indicator is lit?
If your Fujitsu Monitor's power indicator is lit but there's no screen display, first check that your computer is switched on. Then, ensure the monitor's data cable is correctly attached to the computer port. Next, press any key on the keyboard, as the computer might be in power saving mode. Finally, adjust the brightness and/or contrast settings until a picture appears.
General| Screen Size | 24 inches |
|---|---|
| Panel Type | IPS |
| Resolution | 1920 x 1080 (Full HD) |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Refresh Rate | 60 Hz |
| Color Support | 16.7 million colors |
| Color Gamut | 99% sRGB |
| Connectivity | HDMI |
| Viewing Angle | 178° |
