What to do if my Fujitsu B24-8T Monitor says 'No Signal'?
If your Fujitsu Monitor displays a 'No Signal' message, first, ensure the data cable is securely connected to the monitor port on your computer. Also, verify that your computer is powered on.
Why is my Fujitsu Monitor screen black but the power light is on?
If your Fujitsu Monitor's power indicator is lit but there's no screen display, try the following: * Ensure that the computer is switched on. * Verify the monitor's data cable is correctly attached to the computer. * Press any key on the keyboard in case the computer is in power saving mode. * Adjust the brightness and/or contrast settings.
How to fix a Fujitsu B24-8T Monitor when there is no screen display and the power indicator is off?
If your Fujitsu Monitor screen is not displaying anything and the power indicator is off, check that the monitor's power cable is correctly connected. Also, ensure that the computer is switched on.
What to do if my Fujitsu B24-8T Monitor picture is shaking?
If the picture on your Fujitsu Monitor is shaking, check that the data cable is correctly attached to the monitor port on the computer. If the issue persists, press the AUTO button to perform an auto-adjustment of the screen.
How to fix 'Frequency out of range' error on Fujitsu Monitor?
If your Fujitsu Monitor displays 'Frequency out of range', it means the input signal doesn't match the monitor's technical specifications. Adjust the video frequency range using your computer's software, referring to its documentation. Alternatively, set a different screen resolution using the computer software.
How to resolve vertical lines on my Fujitsu B24-8T Monitor screen?
If your Fujitsu Monitor has picture disturbances such as vertical lines, press the AUTO button to conduct the auto-adjustment of the screen.
How to get rid of horizontal lines or picture noise on Fujitsu B24-8T?
If your Fujitsu Monitor is showing horizontal lines or picture noise, press the AUTO button to conduct the auto-adjustment of the screen.
Why is the picture position not correct on my Fujitsu B24-8T?
If the picture position on your Fujitsu Monitor is not correct, it might be recognizing an undefined mode. Press the AUTO button to conduct the auto-adjustment of the screen.
How to fix wrongly adjusted picture on Fujitsu B24-8T?
If the picture on your Fujitsu Monitor is wrongly adjusted, run the Factory Recall function in the OSD menu. The Auto Processing message will appear.
Why is my Fujitsu Monitor screen getting darker?
If your Fujitsu Monitor screen becomes darker, it could be due to the background lighting reaching the end of its lifespan. Contact our Service Desk.
Details essential safety regulations for data processing equipment and general precautions for use.
Steps for unpacking the monitor and verifying the contents and condition.
General instructions and warnings for positioning and setting up the monitor.
Procedure for adjusting the monitor's vertical height.
How to rotate the monitor display 180 degrees.
Instructions for detaching the monitor base for accessory mounting.
Details on connecting various data and power cables to the monitor ports.
Instructions for turning the monitor on and off, and status indicators.
General| Screen Size | 23.8 inches |
|---|---|
| Panel Type | IPS |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| VESA Mount Compatible | Yes (100 x 100 mm) |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Color Support | 16.7 million colors |
| Resolution | 1920 x 1080 |
| Connectivity | DisplayPort, VGA |
| Built-in Speakers | Yes |
| Viewing Angle | 178° (H) / 178° (V) |
To Next Page