Operation
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the Forwa rds / ECO button to switch the ECO operating mode on or off.
The message ECO on / off is displayed.
If the ECO operating mode is activated, the fo llowing OSD settings are changed :
Colour
temperature
6500K
Brightness
reduced
After the ECO operating mode is switched o ff, the brightness previously set by the user is re stored.
Locking the OSD menu
The O SD menu can be locked to prevent accidental or unauthorised cha nges to the m onitor settings.
► Press and ke ep the
SELECT/ME
NU
button pressed for a few seconds while you
switch on the monitor with the ON /O FF switch.
The message OSD locked / unlo
cked is displayed.
Proceed in the same way to r
elease the locked OSD menu aga in.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unau thorised
changes to the monitor s ettings.
► Press the F orwards / ECO button and the Back /
INPUT
button at the same
time and keep them pressed for a few seconds.
The message Power button l
ocked / unlocked is displayed.
Proceed in the same way to
release the locked O N/OFF switch again.
Changing the monitor s ettings using the OSD menu
With the buttons on the co ntrol panel, you can call up and use the integrated
OSD (On-Screen Display) menu.
A26361-K1317-Z220-1-761 9, edition 2 17
To Next Page
Loading...
