Getting started
Connecting the device
Please observe the safety information in "Important note s", Page 3.
CE conformance and optimum picture quality are guaranteed only if
you use the data cables supplied.
► Switch off the monitor and the computer.
► Disconnect the power plug from the comput er.
Connecting cables to the mon
itor
The data cables supplied have two 15-pin D-SUB connectors or two 24-pin DVI
connectors for connection to the monitor and to the computer.
Information on the computer connections and interfaces is contained in the
operating manual for the computer.
1
1 = Security slot for "Kensington Lock"
► Select the data cable which is suitable for your computer.
12 A26361-K1317-Z220-1-7619, edition 2
To Next Page
Loading...
