Operation
Adjusting the brightness and contrast
Call up the Brightness/Contrast setting window
Brightness
Set the brightness of th e display
With this function yo u change the brightness of the backgroun d lighting.
Contrast
Set the contrast of the display
With this function you mod ify the contrast of bright colour tones.
Black level
Set the brightness of th e display
With th is function you modify the contrast of dark colour tones.
Auto level
Adjust the signal level
With this function you can automatically set the contrast.
The function is executed with the
button.
If the contrast is s et too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set t oo low, the maximum brightness will not be achieved.
Adjusting the picture size and position
Call the Image adjust setting window
Phase
Eliminate picture disturbance
With this function you fine-tune your monitor to eliminate picture disturbance.
Clock
Set synchronisation
With this function you adjust the picture w idth to eliminate vertical picture
disturbances.
H-Position
Adjust the h o rizont al position
With this function you move the picture to the left or to the righ t.
V-Position
Adjust the vertical position
With this f unct ion you move the picture up or down .
Expansion
Adjust the picture size
Full screen = selection of full screen mode
Keep aspect = maximum picture size without distortion
Adjusting the volume
Call t
he Audio setting window
Volume
Set t
he volume for playba ck with the integrated loudspeakers
Mute
Switch the loudspeakers off or on
26
To Next Page
Loading...
Need help?
General
Weight and Dimensions
