Operation
Setting functions in the Advanced menu
Call up the Advance d setting window
Input select
Selecting the input signal
This function allows you to switch the monitor from analogue to digital mode
and vice versa, when several signal sources are connected.
This requ ires t hat the graphic card used supports this function.
DDC-CI
Activation/deactivation of the DDC-CI
On = The DDC-CI function is enabled (standard setting)
Off = The DDC-CI function is disabled
ACR
Enable/disable ACR function
On = The ACR function is enabled
Off = The ACR function is disabled (de fault setting)
Factory Recall
Activating the factory settings
With this function all setting s are reset to the facto ry settings without
prompting for confirm ation.
Press the
button to activate the function. The message Auto
Processing is d isplayed.
Displaying in
formatio n
Call the Inform ation setting window
This function displays the m odel designation, serial number, r esolution, H/V
frequency and ECO mode.
28
To Next Page
Loading...
