Fujitsu F2MC-16L User Manual

FUJITSU SEMICONDUCTOR
CONTROLLER MANUAL
F
2
MC-16L/16LX/16/16H/16F
µITRON 2.01 SPECIFICATIONS COMPLIANT
S
OFTUNE
REALOS/907
USER’S GUIDE
CM42-00325-3E
*

Fujitsu F2MC-16L Specifications

General

Architecture	16-bit
CPU Core	F2MC-16L
Operating Frequency	16 MHz
Timers	8/16-bit Timers
ADC	10-bit ADC
Communication Interfaces	UART, I2C, SPI
Operating Voltage	2.7V to 5.5V
Package	QFP, LQFP

Summary

Preface

Objective of this Manual

Details the purpose and scope of this user's guide for REALOS/907.

Trademarks

Lists trademarks related to TRON, µITRON, SOFTUNE, REALOS, and Microsoft products.

Intended Reader of this Manual

Describes the target audience and required knowledge for using this manual.

Organization of this Manual

Outlines the structure of the manual, including chapters and appendix.

Chapter 1 Notes on Operation

1.1 Notes on Programming

Important points and restrictions for programming with Softune REALOS/907.

1.2 Notes on Hardware

Key considerations and requirements related to the hardware for Softune REALOS/907.

Chapter 2 Developing Application Systems

2.1 REALOS/907 Products

Details the software components and manuals included in the REALOS/907 package.

2.2 Directory Configuration

Explains the file structure and directories after installing REALOS/907.

2.3 Preparing a Development Environment

Lists the necessary cross-development tools and software for REALOS/907 development.

2.4 Installing REALOS/907

Step-by-step guide on how to install the REALOS/907 software on a host computer.

2.5 Programs Required for an Application System

Describes the essential program components like tasks, handlers, and their roles.

2.6 Development Steps

Outlines the systematic process for developing an application system using REALOS/907.

2.7 Developing User Programs

Guides on splitting system functions into tasks and handlers and developing user programs.

2.8 Developing a User-Defined Module

Explains how to create custom modules, including reset entry routines and handlers.

2.9 Configuring and Running a System

Covers system configuration using the configurator and the process of downloading and running the system.

Chapter 3 Overview of the Standard I/O Library

3.1 Structure of the Standard I/O Library

Describes the functions (putchar, getchar, printf) and library files.

3.2 Incorporating the Standard I/O Driver

Details the specifications for creating and integrating custom I/O drivers.

3.3 Example of Creating a Standard I/O Driver

Provides an assembly code example for implementing a standard I/O driver.

3.4 How to Use the Standard I/O Library

Explains how to use the I/O library functions from C and assembly language.

Chapter 4 Program Reference for the Standard I/O Library

4.1 Standard I/O Function Interface Putchar

Details the interface, parameters, and description for the putchar function.

4.2 Standard I/O Function Interface Getchar

Details the interface, parameters, and description for the getchar function.

4.3 Standard I/O Function Interface Printf

Details the interface, parameters, and description for the printf function.

Appendix

Appendix A Program Description

Describes the nine programs provided by REALOS/907, including kernel, I/O library, and sample systems.

Appendix B Running the Sample System

Guides on setting up and executing the provided sample programs for REALOS/907.

Appendix C Sample System Memory Map

Presents the memory capacity requirements for the REALOS/907 sample system.