10
CHAPTER 2 Developing Application Systems
2.4 Installing REALOS/907
You must install REALOS/907 on the host computer before you can start developing
REALOS/907 application programs.
The following describes the procedure for installing REALOS/907.
■ Installation
Run SETUP.EXE from root directory of the installation disks on Windows. Follow the instructions
displayed by the installation program and specify the directory for installing REALOS/907. The
installation program installs the system under the specified directory. Installing all files requires
about 40MB of disk space.
Specify the drive containing the disk in the underlined section.
Note: Do not use double-byte codes or Japanese characters for the installation
directory name.
D:\> SETUP
To Next Page
Loading...
