17
2.9 Configuring and Running a System
2.9 Configuring and Running a System
Generate the system by linking the user program and kernel module using the
configurator.
Download the resulting absolute format object to the target system, then run the
system. The user tasks start after kernel initialization.
■ Configuring the system
Configure the system using the configurator.
Execute configuration processing after defining the configuration settings. This generates the
kernel initialization data and vector table based on these settings. Next, the REALOS/907 kernel
module and user program are linked and the absolute format object program is generated for the
REALOS/907 application system.
See "Softune REALOS Configurator Manual" for details.
■ Running the System
Download the absolute format object program generated by the configurator to the target system
then trigger a reset to start the REALOS/907 application system.
To Next Page
Loading...
