4
*2: Required disk space varies according to the
file size of the scanned images.
Install the bundled software from the Setup DVD-
ROM in the following procedure.
Note that there are two ways to install the bundled
software: select [Installation (Recommended)] to
install all the software required to operate the
scanner, or [Installation (Custom)] to select and
install the software as needed.
■ Installation (Recommended)
The following software are installed:
PaperStream IP (TWAIN)
PaperStream IP (TWAIN x64)
Software Operation Panel
Error Recovery Guide
PaperStream Capture
Manual
Scanner Central Admin Agent
fi Series Online Update
1. Turn on the computer and log onto
Windows
®
as a user with Administrator
privileges.
2. Insert the Setup DVD-ROM into the DVD
drive.
The [fi Series Setup] screen appears.
3. Click the [Installation (Recommended]
button.
4. Follow the instructions on the screen to
proceed with the installation.
ATTENTION
If the system requirements above are not
satisfied, the scanner may not operate.
Scanning speed will slow down in the following
cases:
- The CPU or the memory does not meet the
required specifications
- The version of the USB port or the USB hub
is USB 1.1
HINT
The screenshots used in this manual are of
Windows
®
7. The actual windows and
operations may differ depending on the
operating system.
Where there is no distinction between the
different versions of the operating system
shown in the table of system requirements, the
general term Windows
®
is used.
Installing the Bundled Software
ATTENTION
If an old version of the software is installed
already, uninstall it first.
For details about the uninstallation procedures,
refer to "A.5 Uninstalling the Software" in the
Operator's Guide.
HINT
If the [fi Series Setup] screen does not
appear, double-click "Setup.exe" in the
Setup DVD-ROM via Windows Explorer or
[Computer].
To Next Page
Loading...
Need help?
General
Weight and Dimensions
