3
The troubleshooting section of the system User’s Guide
lists the messages that may appear while using the BIOS.
Where applicable, possible solutions are included. Each
fatal error message also includes the corresponding beep
code
If there has been a change in the system configuration
that does not agree with the parameter settings stored
in your BIOS memory, or there is a failure in the system,
the system beeps and/or displays an error message after
the Power On Self Test (POST). If the failure is not
too severe, it will give you the opportunity to modify
the settings of the SCU.
POINTS
■
If your notebook beeps a series of beeps that sounds
like a code and the display is blank, please refer to the
Troubleshooting Section of the system User’s Guide.
The Troubleshooting Section includes a list of error
messages and their meanings.
■
If your data security settings require it, you may be
asked for a password before the operating system will
be opened.
Main Menu
Pine BIOS.fm Page 3 Tuesday, June 4, 2002 10:41 AM
To Next Page
Loading...
Need help?
General