Working with the notebook
Inserting or removing a data carrier
InsertingRemoving
The notebook must be switched on.
2
1
► Push the insert/eject button (1).
The drive tray will open.
► Gently pull the drive tray (2) com plete ly out.
► Place th e data carrier in the drive tray with
the printed side fa cing upw ards.
or
► Remove a da ta carrier that has
been inserted.
► Push in the drive tray until you
feel it lock into place.
Manual removal (emergen cy removal)
CD/DVD:ManualremovalofdatacarrierEmergencyrem ovalofdata carrier
In the event o
f a power failure or damage to the drive, you can remove the data carrier manually.
1
2
► Switch your
notebook off.
► Push a pen or a piece of wire (such as a
paperclip) firmly into the opening (1).
The drive t
ray is ejected. You can now pull
the drive t
ray (2) out of the drive.
Fujitsu 35
To Next Page
Loading...
