Troubleshooting and tips
The n otebook’s LCD screen remains blank
LCDscreenLCDscreenistoodark
Cause Tro ub lesho ot ing
Monitor is switched off.
► Press a key or touch the touchpad.
External monitor or television set connecte d. ► Press the ke y combination to switch the
screen output, see "
Key comb inations",
Page 24.
The LCD screen is difficult to read
LCDscreenLCDscreen
Cause Tro ub lesho ot ing
Reflected g lare ► Turn the notebook or alter the tilt of the LCD
screen.
► Increase the brightness of the screen.
The external monitor remains blank
Monitor
Cause Tro ub lesho ot ing
Monitor is switched off. ► Switch th e external monitor on.
Power saving h as been activated (monitor is
blank).
► Press any key to continue.
Brightness is set to dark.
► Adjust the brightness of the mo nitor.
Screen output is set to the notebook’s LCD
screen
► Press the ke y combination to switch the
screen output, see "
Key comb inations",
Page 24.
The external monitor’s power cable or data
cable is not connected properly.
► Switch off the external monitor and the
notebook.
► Check whet
her the power cable is plugged
properly i
nto the external monitor and into
the power s
ocket.
► Check w hether the data cable is p ro perly
connected to the no tebook and the external
monitor (if it is plugged in with a connector).
► Switch o
n the external mon itor and the
noteboo
k.
58 Fujitsu
To Next Page
Loading...
