20
LifeBook A6000 Series Notebook - Section Two
At the bottom of each application setup page are two
selectable options. The first will enable/disable the
button when your LifeBook notebook is in Standby
mode, and the second will enable/disable the button
when your LifeBook notebook is powered off. You can
enable/disable either or both of these functions simply
by clicking on the option.
When you have finished with Button Setting window,
click on OK, and the new settings will take effect. You
can reconfigure your LifeBook Application Panel as
often as you like.
If you choose to use the buttons when the
notebook is in standby or turned off, they
will function even if hit accidentally, and
will turn on your notebook even if you are
not using the notebook. This could deplete
your battery, and you will need to recharge
it before using the notebook.
ferret.book Page 20 Monday, April 23, 2007 1:32 PM
To Next Page
Loading...
