19
Event Logging Submenu of the Advanced Menu
The Event Logging submenu configures event logging features for DMI events.
Figure 13. Event Logging Submenu
Table 13: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Menu Field Options Default Description
Event Log Capacity: Space Available Display only
Event Log Validity: Valid Display only
View Event Log:
Enter [Enter] Allows you to view content of event log
Event Logging:
Disabled
Enabled
[Enabled] Turns event logging on and off for all DMI events.
Clear All Event Logs:
Enter [Enter] After clicking [Enter], a Setup Notice appears prompting you to select [Yes]
or [No] to confirm. When set to [Yes] all event logs will be cleared at next
boot.
Mark Events as Read:
Enter [Enter] After clicking [Enter], a Setup Notice appears prompting you to select [Yes]
or [No] to confirm. When set to [Yes] all event in the events log will be
marked as having been read.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Item Specific Help
Press <Enter> key to
view the contents of
the event log.
Event Logging
Event Log Capacity: Space Available
Event Log Validity: Valid
View Event Log: [Enter]
Event Logging: [Enabled]
Clear All Event Logs: [Enter]
Mark Events as Read: [Enter]
Info System Advanced Security Boot Exit
Phoenix SecureCore(tm) Setup Utility
Advanced Menu
To Next Page
Loading...
