16
LIFEBOOK E/P/S/U BIOS Guide
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configuration submenu allows the user to enable or disable a wide variety of devices and
controllers, depending upon system configuration.
Figure 9. Internal Device Configuration Submenu
Table 9: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu
Menu Field Options Default Model Description
Serial ATA Controller:
Disabled
Enabled
[Enabled] All Enables or disables the Serial ATA controller.
SATA Controller Mode Selection:
IDE
AHCI
[AHCI] All Allows you to select the SATA controller opera-
tion mode if Serial ATA Controller is set to
Enabled.
Bluetooth(R):
Disabled
Enabled
[Enabled] All Enables or disables the Bluetooth device.
LAN Controller:
Disabled
Enabled
[Enabled] All Enables or disables the LAN controller.
Wireless LAN:
Disabled
Enabled
[Enabled] All Enables or disables the Wireless LAN controller.
Wireless LAN/WiMax:
Disabled
Enabled
[Enabled] All Enables or disables the Wireless LAN/WiMax
feature.
Wireless LAN/Bluetooth:
Disabled
Enabled
[Enabled] E752, S752,
S762
Enables or disables the Wireless LAN/Bluetooth
combo module.
Modem:
Disabled
Enabled
[Enabled] E752, S752,
S762, P772
Enables or disables the Modem device.
Phoenix SecureCore(tm) Tiano Setup
Item Specific Help
Advanced
[Disabled]
Serial ATA port is
disabled.
[Enabled]
Serial ATA port is
enabled.
Internal Device Configurations
Serial ATA Controller: [Enabled]
SATA Controller Mode Selection: [AHCI]
Bluetooth(R): [Enabled]
LAN Controller: [Enabled]
Wireless LAN: [Enabled]
Wireless LAN/WiMax [Enabled]
Wireless LAN/Bluetooth: [Enabled]
Modem [Enabled]
Fingerprint Sensor: [Enabled]
Wireless WAN: [Enabled]
Internal Camera: [Enabled]
SD Card Slot: [Enabled]
SD Card/Memory Stick Slot: [Enabled]
Smart Card: [Enabled]
USB 3.0 Controller: [Enabled]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select ► Sub-Menu
F9 Setup Defaults
F10 Save and Exit
/
/
To Next Page
Loading...
