6
LifeBook N Series BIOS
Drive0 Selects the Drive0
Serial ATA drive
submenu
The product
number of the hard
drive.
Display the type of device on this ATA/IDE interface. Pressing the
Enter key selects the Serial ATA Drive0 submenu allowing additional
device configuration options for this interface.
Drive1: Selects the Drive1
Serial ATA drive
submenu
The product
number of the
optical drive.
Display the type of device on this ATA/IDE interface, if there is one.
Pressing the Enter key selects the Serial ATA Drive1 submenu allow-
ing additional device configuration options for this interface.
Drive4 Selects the Drive4
e-ATA drive sub-
menu
The product
number of the e-
SATA drive.
Display the type of device on this e-SATA interface. Pressing the
Enter key selects the e-SATA Drive4 submenu allowing additional
device configuration options for this interface.
Drive5: Selects the Drive5
2nd hard disk drive
submenu
The product
number of the
2nd hard disk drive.
Display the type of device on this interface, if there is one. Pressing
the Enter key selects the Drive5 submenu allowing additional device
configuration options for this interface.
Language:
■
English (US)
■
Japanese (JP)
[English (US)] The default setting differs between the US and the Japanese model.
Selects the display language for the BIOS.
Table 2: Fields, Options and Defaults for the System Menu
Note that the parameters listed in the following table may vary depending upon your system’s configuration.
Menu Field Options Default Description
To Next Page
Loading...
