7
Drive0 Submenu of the System Menu
The Drive0 submenu identifies what ATA devices are installed.
Figure 3. Drive0 Master Submenu
Table 3: Fields, Options and Defaults for the Drive0 Submenu of the System Menu
Menu Field Options Default Description
Drive0:
■
Disabled
■
Enabled
[Enabled] Enables and disables Drive0.
Type:
---
--- The type of drive represented by Drive0.
Model:
---
--- The model of the Drive0 drive.
Capacity:
---
--- The maximum capacity of your hard disk
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Item Specific Help
[Disabled]
The drive is disabled.
[Enabled]
The drive is enabled.
Drive0 [WDC WD3200BEVS-16VAT0]
Drive0: [Enabled]]
Type: Hard Disk
Model: WDC WD3200BEVS-16VAT0
Capacity: 320GB
(320,072,933,376 Bytes)
▲
Phoenix SecureCore(tm) Setup Utility
Info System Advanced Security Boot Exit
System Menu