9
Drive4 Submenu of the System Menu
The Drive4 submenu identifies what ATA devices are installed.
Figure 5. Drive4 Master Submenu
Table 5: Fields, Options and Defaults for the Drive4 Submenu of the System Menu
Menu Field Options Default Description
Drive4:
■
Disabled
■
Enabled
[Enabled] Enables and disables Drive4.
Type:
---
--- The type of drive represented by Drive4.
Model:
---
--- The model of the Drive4 drive. (This field is only present when the device is
present).
Capacity:
---
--- The maximum capacity of your hard disk. (This field is only present when
the device is present).
Phoenix TrustedCore(tm) Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Item Specific Help
[Disabled]
The drive is disabled.
[Enabled]
The drive is enabled.
Drive4 [None]
Drive4: [Enabled]
Type: None
▲
Info System Advanced Security Boot Exit
System Menu
To Next Page
Loading...
