67
- Memory Upgrade Module
Memory Upgrade Module
Your notebook has two memory slots. If you have a module installed in only one slot, you can increase
your memory capacity by installing another memory module in the empty slot or by increasing the size of
the single installed module. In order to optimize the dual-channel design, modules of equal capacity
should be used.
Your notebook supports dual-channel memory, which can have a great effect upon system performance.
In order to support dual-channel memory, two DIMM modules must be installed in your computer.
• DO NOT REMOVE ANY SCREWS FROM THE MEMORY UPGRADE MODULE COMPARTMENT EXCEPT THOSE
SPECIFICALLY SHOWN IN THE DIRECTIONS FOR INSTALLING AND REMOVING THE UPGRADE MODULE.
• THE MEMORY UPGRADE MODULE CAN BE SEVERELY DAMAGED BY ELECTROSTATIC DISCHARGE (ESD).
T
O MINIMIZE RISK TO THE MODULE, OBSERVE THE FOLLOWING:
• BEFORE HANDLING A MEMORY MODULE, TOUCH A GROUNDED METAL OBJECT TO DISCHARGE
STATIC ELECTRICITY BUILT UP IN YOUR BODY.
• WHEN INSTALLING OR REMOVING A MEMORY MODULE, HOLD IT BY THE EDGE SO AS NOT TO
TOUCH ANY CONTACTS OR CHIPS. DO NOT TO TOUCH ANY INTERNAL COMPUTER TERMINALS OR
COMPONENTS; THE OIL FROM YOUR FINGERS COULD CAUSE A SHORT TO THE COMPONENTS.
• POWER DOWN YOUR SYSTEM BEFORE YOU ADD OR REMOVE MEMORY MODULES. EVEN IF THE
SYSTEM IS IN HIBERNATE OR SLEEP STATES, DATA COULD BE LOST OR THE MEMORY COULD BE
DAMAGED IF POWER IS STILL AVAILABLE TO THE SYSTEM.
• THE INSTALLATION OF INCOMPATIBLE MEMORY MODULES CAN CAUSE NUMEROUS PROBLEMS WHICH
COULD RESULT IN LOSS OF DATA. FUJITSU HIGHLY RECOMMENDS THAT YOU ONLY PURCHASE
ADDITIONAL MEMORY FROM THE FUJITSU ON-LINE ACCESSORY STORE AT: WWW.SHOPFUJITSU.COM.
To Next Page
Loading...
