29. Extract 1 screw from the
Bluetooth board and lift it out.
31. Lift the external VGA connector
cover out of the lower case.
33. Extract 1 screw from the Pen
Catch and lift it out.
35. Insert the stylus into its slot.
30. Lift the RJ45 connector and
cable out of the lower case.
32. Press the stylus to release it and
slide it out.
34. Insert the Pen Catch into the
new lower case and secure it with 1
screw.
36. Insert the external VGA
connector cover into the lower case.
To Next Page
Loading...
