What to do if my Fujitsu Laptop stops working?
If your Fujitsu laptop stops working, it might be in energy-saving mode, so exit that mode. If an application program has caused the malfunction, close the program or restart the laptop. If the battery is dead, charge it, insert a charged battery, or connect the mains adapter.
Why keyboard types only numbers on Fujitsu LifeBook P702?
If certain characters are entered on the keyboard of your Fujitsu laptop and only numerals are written, the virtual numeric keypad of your device is activated. Press the Num key to deactivate it.
What to do if there is stuck key on Fujitsu LifeBook P702?
If a key is stuck on your Fujitsu laptop, make sure that no key is pressed down.
What to do if Fujitsu LIFEBOOK notebook turns off by itself?
If your Fujitsu LIFEBOOK notebook turns off unexpectedly, it could be due to power management settings, a low battery, or a battery failure. Try pressing any keyboard button or moving the mouse, or push the Power/Suspend/Resume button. Check your power management settings in the Control Panel to adjust the timeout values. If you're running on battery, connect a power adapter and press the Power/Suspend/Resume button. Also, verify the battery's condition using the Status Indicator panel; if the battery is shorted, replace or remove it.
What to do if external monitor remains blank with Fujitsu LifeBook P702 Laptop?
If the external monitor is blank, first ensure it is switched on. If power saving mode is active, press any key. Check and adjust the monitor's brightness settings. Verify that the screen output is correctly set, and that both the power and data cables are properly connected to both the monitor and the Fujitsu laptop.
What to do if external monitor is blank or the image is unstable on Fujitsu Laptop?
If the external monitor is blank or the image is unstable, the wrong external monitor might have been selected, or the screen resolution is not set correctly for the application program. Terminate the application program in Windows by pressing Alt + F4. If the problem continues after closing the program, use the key combination for switching the screen output to switch over to the notebook’s LCD screen. Set the screen resolution as described in the documentation for your operating system and select monitor 1 or 2 as described in the documentation for your operating system.
Why does my Fujitsu LifeBook P702 beep every few seconds?
If a beep sounds every few seconds and the battery is almost flat on your Fujitsu laptop, charge the battery.
How to fix radio connection if it does not work on Fujitsu LifeBook P702?
If the radio connection to a network does not work on your Fujitsu laptop, ensure the wireless component is enabled. If it's already enabled but the connection still fails, verify that the radio connection is switched on via the software.
Why Fujitsu LifeBook P702 Laptop will not work on battery?
If your Fujitsu notebook won't work on battery alone, replace the battery with a charged one or install an AC adapter if the installed battery is dead. If no battery is installed, install a charged battery. If the battery is improperly installed, verify that it is properly connected by reinstalling it.
Why Fujitsu LifeBook P702 display goes blank?
If your Fujitsu laptop display goes blank, press a keyboard button or move the mouse. If that fails, push the Power/Suspend/Resume button. Check your power management settings. This usually happens because the notebook has gone into Video timeout, Sleep, or Save-to-Disk mode. Also, power management timeouts may be set for short intervals.
General| Resolution | 1280 x 800 |
|---|---|
| Graphics | Intel HD Graphics 4000 |
| Processor | Intel Core i5 |
| CPU | Intel Core i5-3320M |
| RAM | DDR3 |
| Storage | 320 GB HDD |
| Display | 12.1-inch LED Backlit |
| Operating System | Windows 7 Professional |
| Ports | USB 3.0, VGA, Ethernet, SD card reader |
| Wireless | Wi-Fi 802.11 a/b/g/n, Bluetooth 4.0 |
Provides phone numbers, website, and required information for contacting support.
Identifies and describes the location of various controls and connectors on the notebook.
Discusses the notebook's power options: battery, AC adapter, and auto/airline adapter.
Explains features for conserving battery power, including sleep and hibernation modes.
Instructions on how to recharge the notebook's battery.
Step-by-step guide for replacing the notebook's battery.
General procedures for identifying and resolving common notebook issues.
Steps to follow before attempting complex troubleshooting.
Lists common problem categories for troubleshooting.
A detailed table outlining problems, causes, and solutions.
Troubleshooting steps for issues related to audio output.
Troubleshooting issues related to the optional port replicator.
Troubleshooting steps for issues related to accessing the hard drive.
Troubleshooting steps for input devices like the keyboard and touchpad.
Troubleshooting steps for issues related to system memory.
Troubleshooting steps for USB devices not being recognized or functioning properly.
Troubleshooting steps for issues with ExpressCards.
Troubleshooting steps for power-related issues.
Troubleshooting steps for issues during system shutdown or startup.
Troubleshooting steps for display-related issues.
Procedures for creating and restoring system backups and factory images.
Instructions on how to create a backup copy of the factory image.
Steps to restore the notebook to its original factory state.
How to create a system image backup for recovery purposes.
General guidelines and tips for maintaining the notebook's condition and longevity.
Instructions for cleaning the notebook's exterior, keyboard, and LCD screen.
Guidelines for battery care, handling, and charging.
Tips and settings to maximize the battery's operational life.
Overview of the notebook's hardware and environmental specifications.
Lists the software applications pre-installed on the system.
Guidance on setting up and preparing the optional wireless LAN adapter.
Instructions on how to disable the wireless LAN adapter.
Instructions on how to enable the wireless LAN adapter.
Step-by-step guide to configure wireless network settings in Windows.
Instructions for connecting the notebook to a wireless network.
Technical specifications for the wireless LAN card.
Introduction to the fingerprint sensor and its benefits for security.
Detailed instructions for installing the OmniPass software.
Procedures for removing the OmniPass application.
Guide to enrolling a new user for fingerprint recognition.
Step-by-step guide for the initial user enrollment process.
Detailed instructions for capturing and registering a fingerprint.
Instructions on how to launch and initiate a WiDi connection.
To Next Page
