How to correct date and time on Fujitsu LifeBook P702?
To correct the date or time on your Fujitsu laptop, use the BIOS-Setup-Utility to set the date and time in the main menu. If the issue persists, contact your sales outlet or our Hotline/Service Desk.
Why does my Fujitsu LifeBook P702 beep every few seconds?
If a beep sounds every few seconds and the battery is almost flat on your Fujitsu laptop, charge the battery.
How to improve LCD screen readability on Fujitsu LifeBook P702 Laptop?
If the LCD screen of your Fujitsu laptop is difficult to read, try turning the laptop or adjusting the tilt of the LCD screen to reduce reflected glare. You can also increase the brightness of the screen.
Why the printer does not print from Fujitsu LifeBook P702?
If the printer does not print, first ensure that the printer is switched on and ready for operation. Then, check that the data cable connecting the Fujitsu laptop to the printer is properly connected. Finally, verify that the correct printer driver is loaded.
Why my Fujitsu Laptop cannot be started?
If your Fujitsu laptop cannot be started, check whether the battery is correctly installed. If the battery is dead, charge it, insert a charged battery, or connect the mains adapter to the laptop. Also, ensure the power adapter is correctly connected to the laptop.
What to do if my Fujitsu Laptop stops working?
If your Fujitsu laptop stops working, it might be in energy-saving mode, so exit that mode. If an application program has caused the malfunction, close the program or restart the laptop. If the battery is dead, charge it, insert a charged battery, or connect the mains adapter.
Why Fujitsu LifeBook P702 Laptop will not work on battery?
If your Fujitsu notebook won't work on battery alone, replace the battery with a charged one or install an AC adapter if the installed battery is dead. If no battery is installed, install a charged battery. If the battery is improperly installed, verify that it is properly connected by reinstalling it.
What to do if Fujitsu LifeBook P702 does not recognize USB device?
If your Fujitsu notebook doesn't recognize a USB device, remove and reinstall the device. If the device was installed while an application was running, close the application and restart your notebook. Also, ensure that the correct software driver is active by checking your software documentation.
Why Fujitsu LifeBook P702 display goes blank?
If your Fujitsu laptop display goes blank, press a keyboard button or move the mouse. If that fails, push the Power/Suspend/Resume button. Check your power management settings. This usually happens because the notebook has gone into Video timeout, Sleep, or Save-to-Disk mode. Also, power management timeouts may be set for short intervals.
What to do if Fujitsu Laptop keyboard does not work?
If the built-in keyboard on your Fujitsu laptop isn't working, first, push the Power/Suspend/Resume button in case the notebook has entered Sleep mode. If that doesn't work, try using your integrated pointing device to restart your system, as your application may have locked out the keyboard. Finally, ensure the NumLock key hasn't been accidentally activated by pressing the NumLock key to toggle it off.
General| Resolution | 1280 x 800 |
|---|---|
| Graphics | Intel HD Graphics 4000 |
| Processor | Intel Core i5 |
| CPU | Intel Core i5-3320M |
| RAM | DDR3 |
| Storage | 320 GB HDD |
| Display | 12.1-inch LED Backlit |
| Operating System | Windows 7 Professional |
| Ports | USB 3.0, VGA, Ethernet, SD card reader |
| Wireless | Wi-Fi 802.11 a/b/g/n, Bluetooth 4.0 |
Provides phone numbers, website, and required information for contacting support.
Identifies and describes the location of various controls and connectors on the notebook.
Discusses the notebook's power options: battery, AC adapter, and auto/airline adapter.
Explains features for conserving battery power, including sleep and hibernation modes.
Instructions on how to recharge the notebook's battery.
Step-by-step guide for replacing the notebook's battery.
General procedures for identifying and resolving common notebook issues.
Steps to follow before attempting complex troubleshooting.
Lists common problem categories for troubleshooting.
A detailed table outlining problems, causes, and solutions.
Troubleshooting steps for issues related to audio output.
Troubleshooting issues related to the optional port replicator.
Troubleshooting steps for issues related to accessing the hard drive.
Troubleshooting steps for input devices like the keyboard and touchpad.
Troubleshooting steps for issues related to system memory.
Troubleshooting steps for USB devices not being recognized or functioning properly.
Troubleshooting steps for issues with ExpressCards.
Troubleshooting steps for power-related issues.
Troubleshooting steps for issues during system shutdown or startup.
Troubleshooting steps for display-related issues.
Procedures for creating and restoring system backups and factory images.
Instructions on how to create a backup copy of the factory image.
Steps to restore the notebook to its original factory state.
How to create a system image backup for recovery purposes.
General guidelines and tips for maintaining the notebook's condition and longevity.
Instructions for cleaning the notebook's exterior, keyboard, and LCD screen.
Guidelines for battery care, handling, and charging.
Tips and settings to maximize the battery's operational life.
Overview of the notebook's hardware and environmental specifications.
Lists the software applications pre-installed on the system.
Guidance on setting up and preparing the optional wireless LAN adapter.
Instructions on how to disable the wireless LAN adapter.
Instructions on how to enable the wireless LAN adapter.
Step-by-step guide to configure wireless network settings in Windows.
Instructions for connecting the notebook to a wireless network.
Technical specifications for the wireless LAN card.
Introduction to the fingerprint sensor and its benefits for security.
Detailed instructions for installing the OmniPass software.
Procedures for removing the OmniPass application.
Guide to enrolling a new user for fingerprint recognition.
Step-by-step guide for the initial user enrollment process.
Detailed instructions for capturing and registering a fingerprint.
Instructions on how to launch and initiate a WiDi connection.
To Next Page
