Fujitsu LifeBook P1610 - Device Ports; Attaching Port Replicator; Detaching Port Replicator

46
LifeBook P1600 Series Notebook
ATTACHING PORT REPLICATOR
To attach the Port Replicator, align the Port Replicator
connector on the bottom of your notebook with the connector
on the Port Replicator and push the corners down simulta-
neously.
(Figure 4-8)
Figure 4-8. Attaching the Port Replicator
DETACHING PORT REPLICATOR
To detach the Port Replicator:
1. Pull the Port Replicator’s release latch away from the Port
Replicator to release it from your notebook.
(Figure 4-9)
Figure 4-9. Unlatching the Port Replicator
2. Pull the notebook away from the Port Replicator to detach it
from your system.
(Figure 4-10)
Figure 4-10. Removing the Port Replicator
P Series.book Page 46 Monday, October 9, 2006 10:58 AM