107
- Caring for your LIFEBOOK Notebook
Figure 39. Removing/installing the dust filter access cover
• REMOVE AC ADAPTER: BEFORE CLEANING THE FILTER, TURN OFF THE SYSTEM AND PERIPHERALS AND DISCONNECT THE AC ADAPTER.
• CLEANING THE FILTER:
- D
O NOT USE DETERGENT
- A
VOID DAMAGING THE FILTER; DAMAGE TO THE FILTER IS NOT COVERED BY WARRANTY.
- U
SE A VACUUM CLEANER HANDHELD ATTACHMENT TO CLEAN THE FILTER. METAL OR WOODEN TOOLS COULD DAMAGE THE FILTER.
• ESD: BEFORE CLEANING THE FILTER, TOUCH A METAL OBJECT TO DISCHARGE STATIC ELECTRICITY.
To remove the dust filter cover:
1 Turn off the computer and disconnect the AC adapter.
2 Close the display and turn the system upside down.
3 Remove the dust filter access cover by pressing the latch
toward the center of the cover and lifting it out (Fig.39).
4 Clean the dust filter and the air-cooling duct using a
vacuum cleaner attachment (such as an extension wand).
To Next Page
Loading...
