User-Installable Features
43
1. Plug an AC Adapter into the system and
connect it to a power outlet.
2. Press the two battery bay release latches to
release the battery
(Figure 4-1)
.
3. Remove the battery from the bay.
4. Slide the new battery into the bay
(Figure 4-
2)
. Figure 4-2. Installing a Battery
5. Press the battery down until it clicks into
place.
Figure 4-1. Removing a Battery
Battery Bay
Release Latch
If the Lithium ion battery connector is not fully
seated, you may not be able to use your
notebook or charge your battery.
Figure 4-2. Installing a Battery
Battery Bay
Release Latch
LB_GARLICS 04 (39-47) 21/7/03, 6:25 PM43
To Next Page
Loading...
