Fujitsu LIFEBOOK S Series - Page 73

Troubleshooting
61
Problem Possible Cause Possible Solution
Optical Drive Problems
LifeBook notebook
fails to recognize
DVD/CD-RW/ CD-
ROM’s.
(continued)
The DVD/CD-RW/
CD-ROM Access
indicator on the
Status Indicator
Panel blinks at
regular intervals
when no DVD/CD-
RW/CD-ROM is in
the tray or the
optical drive is not
installed.
LifeBook notebook
does not turn on
when installed in
the Port Replicator
Windows DVD/CD-RW/
CD-ROM auto insertion
function is disabled.
DVD/CD-RW/CD-ROM is
dirty or defective.
The Windows DVD/CD-
RW/CD-ROM auto
insertion function is active
and is checking to see if a
DVD/CD-RW/CD-ROM is
ready to run.
Port Replicator AC
adapter is not plugged in.
Notebook is not properly
seated in the Port
Replicator.
Start the DVD/CD-RW/CD-ROM from the
desktop or application software or re-enable
the Windows DVD/CD-RW/CD-ROM auto
insertion function.
Wipe DVD/CD-RW/CD-ROM with a non-
abrasive CD cleaning cloth and reinsert. It if
still will not work try another DVD/CD-RW/CD-
ROM in the drive.
This is normal. However, you may disable this
feature.
Provide power to the Port Replicator.
Remove and re-dock your LifeBook notebook.
Port Replicator Problems
LB_GARLICS 05 (57-74) 21/7/03, 6:26 PM61